Just under 10” diameter. Finish-turned while green, which is new for me (I usually twice-turn).
I typically remove toolmarks with a scraper, but found that caused a lot of grain tear out so had to skip the scrapers and sand aggressively instead. Thankfully I had some mesh abrasives.
The wood is just some ‘found’ maple. Unfortunately the grain is very plain but there was some cool moss growing on the bark.
-Mark
I typically remove toolmarks with a scraper, but found that caused a lot of grain tear out so had to skip the scrapers and sand aggressively instead. Thankfully I had some mesh abrasives.
The wood is just some ‘found’ maple. Unfortunately the grain is very plain but there was some cool moss growing on the bark.
-Mark