Yeap, I've got another Rocker class on the schedule. I've had one member on hold for a while looking to form a class. This class will start on Sept. 30-Oct.1 and run Oct 14th-15th and run Nov.4-5. For pics of a Maloof rocker please go to my website at www.jsrwoodworking.com. Lots of folks on the board have taken this course. This is a terrific course.
Class Duration: 6 Days.
Class Cost: $400 (Normally $450)
Wood Required: 70 bdft of 8/4 walnut or mahogany
Tools Required:
-angle grinder and sanding disk
-shinto saw rasp
-nicholsen rasp
-No. 8-9 carving chisel at least 19mm wide.
-framing square
-straight edge
A complete list of materials and a cut list for the wood will be supplied upon signup.
Please post or PM if you are interested.
Thanks,
John
Class Duration: 6 Days.
Class Cost: $400 (Normally $450)
Wood Required: 70 bdft of 8/4 walnut or mahogany
Tools Required:
-angle grinder and sanding disk
-shinto saw rasp
-nicholsen rasp
-No. 8-9 carving chisel at least 19mm wide.
-framing square
-straight edge
A complete list of materials and a cut list for the wood will be supplied upon signup.
Please post or PM if you are interested.
Thanks,
John
