Jet JJP-10BTOS Won't turn on

[manfre]

My jointer/planer won't turn on. It sat unused for many months and was working the last time I used it. So far I've confirmed the safety tab is sitting properly. Any suggestions on what to check next?

 

[Henry W]

Check power to that circuit?
Any indication that it has power? Indicator lights somewhere?

Henry W

 

[FlyingRon]

Check the reset button to the right of the switch. There's also a microswitch on the dust switch will inhibit operation if the chute is not seated.

 

[manfre]

Check power to that circuit?
Any indication that it has power? Indicator lights somewhere?

Henry W

No indication from the machine itself. I haven't started to open it up and check it with a meter.

Check the reset button to the right of the switch. There's also a microswitch on the dust switch will inhibit operation if the chute is not seated.

I checked the reset button on the front, but will check that the dust switch.

 

[manfre]

The microswitch for the dust chute was not being fully depressed. It's running again! Thanks Ron!