Interesting article on sharpening a molding plane

[gazzer]

Not quite the way I would go about it, but ...

http://pegsandtails.wordpress.com/2009/11/10/sharpening-a-moulding-plane/

-G

 

[Glennbear]

:rotflm::rotflm::rotflm:

 

[froglips]

I see your "point"

Jim

 

[Sealeveler]

Didn't expect that.Tony

 

[Ray Martin]

Molding planes are often difficult, or at least tricky, to sharpen. It's good to have this expert advice made available to us.



:gar-La;:gar-La;:gar-La;