I started out with 2

Status
Not open for further replies.

LeftyTom

Tom
Corporate Member
bandsaw boxes, that is. I was to the point of sanding the inside and outside of the outsides and insides. Amazingly :eek:, I dropped one of the drawers and one of the boxes during the process. Ah yes, coming inside with more pieces than I took outside.

Of course, the remaining drawer does not fit in the remaining box. :dontknow:

That is why I glued up 4 blocks when I decided to have a go at BS boxes. Alas, all are/were made from cedar. :help: So at the worst, I will be polishing my delicate touch while sanding via hand drill (so I can do this dusty work outside as much as possible).
 

PChristy

New User
Phillip
Sorry to see this Tom - I have been there myself with my scroll saw - I cut out a manger scene puzzle out of 3/4 poplar - just got through sanding all of the pieces and dropped several of the figures = picked them up and for some reason I had more pieces then I started off with - I finally found out where the extra pieces went and I glued them back on:BangHead:
 
Status
Not open for further replies.

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top