I need a handle on this door

[Jon]

I would like to get some suggestions on a flush mounted handle to put on my router table door. i could put just a cheapo Knob on it but I want it to be Flush with everything else on the side. Do you have any suggestions?

 

[DaveO]

Seeing as you will probably need some make-up air being supplied to that enclosure for your DC to work at it's best. I would recommend use a nice large hole with rounder/chamfer edges.
This is what I did to mine -

Dave

 

[Alan in Little Washington]

Not sure what you really mean by a flush pull. I just use the take-up air holes in the plexi window. But there are various kinds of pulls like the foldaway pull for the edge of a pocket door.

 

[Glennbear]

Cut a handhold in the door itself and roundover the edges ? If dust escape is a concern, box in the opening on the inside of the door. :dontknow::wsmile:

 

[Bas]

Wot, no touch button that activates a relay to open the door with a burst of compressed air? How quaint. :rolf:

 

[Jon]

Wot, no touch button that activates a relay to open the door with a burst of compressed air? How quaint. :rolf:

Hmmm Now that might work