DavidF said:The compressor is in and installed - a real beut! still researching the gun. Bernhard put me off the gravity feed Asturo gun and suggested I look at pressure pot equiv. I borrowed a turbine sprayer and will be trying that this week.
DavidF said:Am I right in thinking that on this gun -Apollo "touch up" that the air flow reg just controls the fan shape and that the atomizing air coming out through the centrol nozzle is a constant? other wise, as I see it, you couldn't have a smaller spray pattern without the risk of not atomizing the finish. So, should I just set the air flow for the size of spray pattern and then just ease in the material flow until I get a fine coat on the surface? The material flow control is simply a trigger stop. Once I get this straight in my head I can sort it.
Travis Porter said:David and Steve, the two of you appear to be the "spray finishing junkies".
Where are you spraying, how you keeping the dust down, what you doing for ventilation, and how you keeping from spraying everything else (David, I believe you are spraying everything else from what you say :lol: )?
Travis Porter said:If I get divorced over this, it will be your fault that I have to live in my shop. Unfortunately, I did not equip it with a toilet.:eusa_thin
DavidF said:I do intend to rig up a 3 sided poly booth that hangs from battens on the cieling when the need arises.