I have used this Lamello biscuit joiner for many years. You can probably tell by the old style handle. I use a Festool vac with it for chip collection but it is aggravating because the round hose doesn't fit tightly to the oval port and it falls off frequently. I have searched the web for an adapter and all I have found so far is this:
I may could swallow the $36 but $100 for shipping means no deal. I have also come across what apparently are files for making one on a 3D printer which don't know anything about. So curious if any of you have found an adapter or other solution. Or if anyone has a 3D printer and wants to make some I would be glad to buy one.
Lamello Vacuum Adapter 36mm 331007
36mm vacuum hose adapter. Compatible with Festool hoses.
www.ultimatetools.ca
I may could swallow the $36 but $100 for shipping means no deal. I have also come across what apparently are files for making one on a 3D printer which don't know anything about. So curious if any of you have found an adapter or other solution. Or if anyone has a 3D printer and wants to make some I would be glad to buy one.