A couple years ago I decided to "upgrade" my bandsaw blade to a Laguna Resaw King. I have spent countless hours trying to get it to perform satisfactorily. I have sent the blade back to laguna for resharpening, swapped the 1" blade for a 3/4" blade and tried Ethan's honing method. I never got good results resawing with the fence. It is supposed to be a great blade, but my experience is quite different.
I finally got fed up and ordered a woodslicer from highland woodworking (which is the blade I had before the resaw king). I got my 1/2" woodslicer the other day. Put it on the saw, set the fence to match the drift angle and I had a great looking resawn board on the very first try. I can't say enough good things about the woodslicer blades. They aren't expensive either.
Anyone want to buy a 131.5" long, 3/4" wide carbide toothed Laguna Resaw King with 2 vouchers for free sharpenings? I'll make you a good deal.
At this point, I am just happy to have good resaw capability again.
I finally got fed up and ordered a woodslicer from highland woodworking (which is the blade I had before the resaw king). I got my 1/2" woodslicer the other day. Put it on the saw, set the fence to match the drift angle and I had a great looking resawn board on the very first try. I can't say enough good things about the woodslicer blades. They aren't expensive either.
Anyone want to buy a 131.5" long, 3/4" wide carbide toothed Laguna Resaw King with 2 vouchers for free sharpenings? I'll make you a good deal.
At this point, I am just happy to have good resaw capability again.