I am applying the finishes to my computer desk build New computer desk. I began with 2 coats of shellac and sanded lightly between them. I began with the first coat of GF, recommended 2-3 coats. The first coat went on beautifully. My 3rd coat on the table top has pieces of brush bristles and nibs in the topcoat (along with a small mosquito ). The brush I used was a synthetic brush, and had never been used before this application of finish.
Applying finishes to my projects is always the most frustrating part for me, causing the most stress.
So back to sanding it down below the defects and starting over...I don't have a sprayer to use.
Applying finishes to my projects is always the most frustrating part for me, causing the most stress.
So back to sanding it down below the defects and starting over...I don't have a sprayer to use.