For Sale Delta-Rockwell 40C

[BML]

For sale is a Delta-Rockwell 40C radial arm saw. 115/230v 2hp 1ph

I was going to restore it but don’t have the time and need the space.

$250obo in Apex, NC

 

[ErinJ]

Can you take a picture of the other side?

 

[BML]

Can you take a picture of the other side?

I can tomorrow. Anything particular you’re looking for in the photos so I make sure to get it? Thanks.

 

[zdorsch]

Do you have a close up picture of the serial number badge? Does it run? Is anything seized that you know of?

Thanks!

 

[BML]

The saw head moves smoothly back and forth and all of the head adjustments move. Some of the pins that index the head are stiff and gummed up from sitting. The hand crank that moves the head up and down is stiff but it does move the head. There is some light surface rust on the main shaft so that is likely causing the stiffness. The fence adjustments blocks are not turning. I put a little Kroil on it but haven’t messed with the saw much more than that.

It’s 115/230v and I have not even looked to see what it is already wired for. I am assuming 230v based on the plug, but haven’t wanted to plug it in and try it without verifying.

I bought it to restore but don’t have the time to make that happen.

 

[ErinJ]

I can tomorrow. Anything particular you’re looking for in the photos so I make sure to get it? Thanks.

Just the other side of the saw.

 

[BML]

Just the other side of the saw.

 

[zdorsch]

The saw head moves smoothly back and forth and all of the head adjustments move. Some of the pins that index the head are stiff and gummed up from sitting. The hand crank that moves the head up and down is stiff but it does move the head. There is some light surface rust on the main shaft so that is likely causing the stiffness. The fence adjustments blocks are not turning. I put a little Kroil on it but haven’t messed with the saw much more than that.

It’s 115/230v and I have not even looked to see what it is already wired for. I am assuming 230v based on the plug, but haven’t wanted to plug it in and try it without verifying.

I bought it to restore but don’t have the time to make that happen.

Thank you! I was hoping it was the long arm version.

 

[BML]

There is about 20” of travel

Thank you! I was hoping it was the long arm version.