Customer Ordered Work Bench

[DWSmith]

Just finished today and will be out the door tomorrow. The top is 2 x 24 x 54 hard maple, 2 3/4 square hard maple legs with a bead on the edges, hard maple aprons with a matching bead, finished with several applications of Watco Danish Oil. The customer asked for holes to be drilled in the back of the top to house something or the other. Full extension drawer with soft close.






The bottom stretchers are for shipping and will be removed at the customers location.

 

[Mike Davis]

Seems like you've been doing a lot of those lately.

All very nice looking.

 

[DWSmith]

Have you finished yours yet?

 

[Mike Davis]

No, still working on the tool chest. Need to clear out some room.

 

[Hmerkle]

That is really nice Dave - but Mike would have that thing rockin' like a VW microbus at Woodstock in about 20 minutes! (Too much Schwarz reading on my part I guess!)

I always thought my bench was sturdy until I "Really" started doing hand tool work (thanks to Mike Davis...)