I had some cherry that was harvested from my homesite that was just shy of 3/4 so I planed it to 5/8ths. Then had to figure out what to do with it. I had plans for a Chippendale cradle that called for 5/8ths, so I went ahead and did the below cradle.
The finish is honey amber dye, Seal Coat 1lb shellac, Minwax Cherry gel stain as a toner, Seal coat 1lb sealer and then 4 coats of satin wipe on poly.
The finish is honey amber dye, Seal Coat 1lb shellac, Minwax Cherry gel stain as a toner, Seal coat 1lb sealer and then 4 coats of satin wipe on poly.
Last edited: