BS wheel bearing change

Keye

Keye
Corporate Member
I have a Delta 14" BS. The exploded drawing is dated 7-19-94. It covers models 28-203 thru 28-283. There is not a model number on the saw. I need to replace a bad bearing on the top wheel. There are 2 bearing with a spacer. The exploded drawing shows spring clips holding the bearings in. If there is a spring clip it sure has me fooled. The bearing number is 6202Z.

I have looked on youtube but have not found anything.

As usual, help!
 

bob vaughan

Bob Vaughan
Senior User
I'll usually tap them out with a punch of some sort.
The spacer sleeve is a little loose.
Insert the punch (1/2 or 3/8 steel rod or whatever) and push the steel sleeve to the side. Tap on the bearing's inner race. Go all the way around the inner race tapping until the bearing starts to come out. A little bit at a time. It usually goes rather quickly.
Once one bearing is out, the rest is easy enough.
The clips are on the inside of the wheel hub and space the inside of the bearings.
 

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top