Beall style Buffing System

[NCTurner]

So, I have benn wanting a buffing setup for my lathe. I didn't want all that came with the Beall sys, so this is what I endedup getting, to use with my drill chuck. It was a little cheaper than the Beall sys but not much. Hey every little bit helps...right! BTW who has some tips and tricks for using this?

1x BRBC5 Brown Buffing Compound$5.32
1x CFW10 Canton Flannel WheelHole Size: 1/2"$4.79
2x CW87 Loose Cotton WheelHole Size: 1/2"$5.99
1x WBC5 White Buffing Compound$6.50
3x AA275 Arbor Adapter$4.63

With shipping just over $52.00 Opps I thought I put that in.. Caswell Inc.

 

[woodArtz]

I got the Beall and I'm still trying to get used to it... so not much to offer. I think I spent around $70 for my setup. Where'd you get your parts?

 

[NCTurner]

Opps I thought I put that in.. Caswell Inc.

 

[Sealeveler]

You done good.Caswell has a good selection.Tony

 

[Ken Massingale]

Tips???
Well, don't use the white compounds with Walnut, or any dark wood that is even slightly porus.
Unless you want Walnut bowls with freckles, and yep, I have not one, but two of those! :-(