I am building a floating vanity for a client and I have come to the point of applying a final finish. The couple wanted me to repurpose some wood (pine) from the old doors that were in the house before they started their renovations. I built the vanity with two large drawers out of the wood and stained it with three coats of General finishes water based stain.
The overall dimensions of the countertop are 18" x 22", and the sink is a 16.25" x 16.25" vessel sink, so there wont be much of the wood countertop exposed after it is installed. The faucet is going to be wall mounted. I want to know whether it is okay to just use Arm-r-seal for the finish, probably thinking 3 coats, or if I need to use some sort of seal coat under it. I am open to any suggestions from the community!
Thanks in advance!
The overall dimensions of the countertop are 18" x 22", and the sink is a 16.25" x 16.25" vessel sink, so there wont be much of the wood countertop exposed after it is installed. The faucet is going to be wall mounted. I want to know whether it is okay to just use Arm-r-seal for the finish, probably thinking 3 coats, or if I need to use some sort of seal coat under it. I am open to any suggestions from the community!
Thanks in advance!
Last edited: