I ended up with several sheets left over because some who wanted them couldn't make the pickup points. Therefore I am once again offering full sheets of 1/2" and 3/4" materials as I have a good surplus still in storage. I am also planning to cut some 3/4" into 24"x36" router table tops. Single sheets of 1/2" are $5 per sq.' and 3/4 $6 per sq.' Multiple sheet purchases are $1.00 per foot less. Lots of cutoffs in various thickness also at great bargain prices. Remember you can saw, cut, drill, and tap the sheets with carbide saws and cutters. It glues up well with CA glue and epoxy, plus some other adhesives you will need to research before use.
All the inserts I have, which are many, were all preordered and a separate deal I made with Ron Lee, and I really want to get them all to you. Please respond with how you would like this handled. I've already talked with some of you in my area. Give me a PM for my phone # or email
www.scrollsawbruce.com or PM me in the conversation button. I am planning another distribution run to areas convenient for everyone, even should it take more than 1 run.
All the inserts I have, which are many, were all preordered and a separate deal I made with Ron Lee, and I really want to get them all to you. Please respond with how you would like this handled. I've already talked with some of you in my area. Give me a PM for my phone # or email
www.scrollsawbruce.com or PM me in the conversation button. I am planning another distribution run to areas convenient for everyone, even should it take more than 1 run.