American wood screw

[Knuckles]

i am looking for American made #6 x 5/8" solid brass flat head wood screw. i have tried Fastenal, American Integrated supply, Bolt Depot, and another can not remember there name at this moment. None can supply from an American manufacture. tried using AI with no luck. these screws would be used in a bottom load URN, so yes they need to be American. Thanks to any and all responses.

 

[Mike Davis]

I’m not home now but I can check later. I have some old brass screws. Just not sure I have #6 x 5/8. How many will you need?

 

[Mark Fogleman]

Plenty on Ebay:
https://www.ebay.com/b/Brass-Antique-Screws/162931/bn_18119900

 

[Knuckles]

I’m not home now but I can check later. I have some old brass screws. Just not sure I have #6 x 5/8. How many will you need?

probably more then your personal stock, thank you

 

[Knuckles]

Plenty on Ebay:
https://www.ebay.com/b/Brass-Antique-Screws/162931/bn_18119900

never thought about ebay thanks

 

[Robert LaPlaca]

Could try Jamestown Distributor, but I am not too sure they are US sourced screws. The EBay route sounds like the most likely.

 

[Canuck]

Did you have a look at "McFeeley's"? Saw these solid brass screws but they are No. 5x5/8. Worth a look.

https://www.mcfeelys.com/5-x-5-8-mc...t-head-solid-brass-slotted-drive-qty-100.html

(My goto for screw and fastener needs.)

Wayne

 

[mattfrit]

i am looking for American made #6 x 5/8" solid brass flat head wood screw. i have tried Fastenal, American Integrated supply, Bolt Depot, and another can not remember there name at this moment. None can supply from an American manufacture. tried using AI with no luck. these screws would be used in a bottom load URN, so yes they need to be American. Thanks to any and all responses.

McMaster Carr has them.

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.

www.mcmaster.com

 

[mattfrit]

"American made" might be the hardest part of your search. McMaster lists 12 possible countries of origin.

A local machinist might be able to crank some out for a large pile of cash.

 

[smallboat]

I tried a simple Google search “who produces brass fasteners in US” and got several results. Not specific to wood screws and size but it’s a start.

 

[Jim M.]

Try American Integrated Supply in Detroit. Used them a while back on restoring a museum piece for a friend.

SWFPB006100620 | #6X5/8 FLAT HEAD PHILLIPS WOOD SCREW BRASS | AMERICAN INTEGRATED SUPPLY

www.americanintegratedsupply.com