The particle board extension on my 1992 Delta 52" Unisaw is worn and rough. I am trying to decide what to replace it with. Will melamine or MDF be a better option than particle board. Any other suggestions will be appreciated. The particle board does not have inserts for the screws. Would they be required for MDF or melamine.
should have included the size 48" x 27" x 3/4" and level with the top of the TS
once in place it will not come back off unless something weird happens
should have included the size 48" x 27" x 3/4" and level with the top of the TS
once in place it will not come back off unless something weird happens
Last edited: