1/4 Birch

[PChristy]

Anyone know where I can get some 1/4 Birch ply good both sides close to me in Lexington -

 

[AmishWarlord]

I got some nice 2x2 sheets from Lowes last weekend, try them.

Oh and look at my scrollsaw station post. It was aimed at you.

 

[PChristy]

I got some nice 2x2 sheets from Lowes last weekend, try them.

Oh and look at my scrollsaw station post. It was aimed at you.

Mitch I looked at our Lowe's yesterday and all I seen was 4x8 good one side - did you get your out of the bins? and good both sides

 

[Tar Heel]

Phillip, if all else fails, you might try The Hardwood Store in Gibsonville. I know it is a bit of a drive, but it is a straight shot down I-85. They are good folks to work with.

http://www.hardwoodstore.com/plywood.html

 

[PChristy]

Phillip, if all else fails, you might try The Hardwood Store in Gibsonville. I know it is a bit of a drive, but it is a straight shot down I-85. They are good folks to work with.

http://www.hardwoodstore.com/plywood.html

Thanks Stuart:icon_thum

 

[TedAS]

Phillip,
Give the Wurth Group a try. I have never dealt with them, but I know some who have and have had positive comments on both product and service. I would give them a call to see if they have what you need.

Wurth Wood Group
www.wurthwoodgroup.com

1819 Baker Rd
High Point, NC 27263-2005
(336) 431-2712

 

[PChristy]

Thanks Ted - I will check them out:icon_thum

 

[AmishWarlord]

The Lowes I went to had 10 sheets 3 of them where good on both sides,