wtb

  1. CarolinaRoots

    WTB- 20inch planer

    Figured I would check here before breaking down and buying a new one. Looking for a good working 20” planer. Single phase would be my preference. It’s not urgent but if someone has one they are thinking of selling let me know. thanks Brett
  2. J

    Grizzly Coupons in Wood Magazine?

    I'm looking at purchasing a Grizzly table saw, and customer service just told me that there's a 10% coupon in Wood magazine. My understanding is that the coupon is only included in subscription copies, not newsstand copies. Does anyone have an active Grizzly coupon that they would be willing to...
  3. Clifton

    WTB: Table Saw

    Hi guys, Brand new member here. I need your help. I am looking for a single phase table saw 3-5 hp. I am a paramedic and if you know anything about us you know we dont get paid well so inexpensive is a must. When i say inexpensive i mean between $500 and $1500. I like the powermatic 66's but i...
  4. LeftyTom

    WTB: 8/4 Ash

    I need 8/4 ash in 8 ft lengths; I can work with four in 6ft lengths and eight in 8ft lengths. Or I will take twelve milled 8ft ash 2x4's.
  5. roweathers

    WTB Delta or PM drill press

    Looking at the following drill presses: Delta 18-900L and the PM 2800. Would appreciate any advice on your experiences, thoughts... I would be interested in best place for good deals either new or slightly used. Thanks, Ron
  6. mshel

    WTB Redwood

    Looking for some 6/4 or 8/4 min 8" wide x 8'. Anyone know where one might find some. I'm sure there is some out there somewhere and I will be searching the net but thought I would post here and maybe get lucky. Thanks, Mike
  7. LeftyTom

    WTB Leaf Shredder/Wood Chipper

    I am in the market for a leaf shredder/wood chipper. Had a hefty 8HP model that developed some valve trouble. This time around, I'd prefer something with OHV motor, belt drive or centrifugal clutch. I'd prefer something bigger than 5HP. When I shred leaves I run the shredder for 4 hours or...
  8. J

    Wtb, wooden, raised, panel, doors,

    I need a number of raised panel doors wooden.is there a local supplier with a fairly quick turn around Thanks Dwight
  9. S

    WTB melamine

    Looking for some melamine 2'+ widths for some shop cabinets.
  10. M

    WTB Rough Cut 6/4 Oak

    Hi guys, I'm wanting to buy some rough cut oak to re-deck my trailer. Obviously doesn't need to be of furniture grade since it's only for a trailer. I'll need 8" or 12" wide boards (or something I can make 8") as the deck is 96" wide. I'll either need: Twelve 18' and eight 10' boards OR...
  11. nicemac

    WTB Jet 22" x 44" drum sander

    Would like to have one in excellent condition. I am near Nashville, TN, but willing to drive for a good deal!
  12. N

    WTB: Rail/Stile bit - Whiteside 6001 or Freud 99-260 or Amana

    Do you want to sell a rail/stile bit that you used for one project and now clogging your drawer? Need Rail/Stile bit with simple 1/4" radius bead Whiteside 6001 Freud 99-260 Amana 55420 Can buy the Whiteside for $90 new http://www.woodworkersworld.net/stile_rail_bits.shtml
  13. S

    WTB or Trade for a Old Delta Motor

    I would like to buy or trade for a old delta dual shaft motor. I doesn't ever need to run as long as it has the dual shaft with the shaft cover still on it. I am looking for a shaft cover for a old delta bandsaw motor, but be willing to buy or trade for a complet motor. circa 1960 or maybe...
  14. Bigdog72

    WTB Poplar

    Anyone in the Lillington/Fayetteville area know of a sawyer with some poplar? I would prefer rough cut kiln dried but will take air dried. Looking for 100bf.
  15. LeftyTom

    WTB Bandsaw Box

    I am in the market for a bandsaw box, which I will out in a raffle at my workplace mid-April. The proceeds from the raffle will go to the Yadkin County Relay For Life '09. The idea at work is for dept's or individuals put together a gift basket. Well, what is better than a basket than a...
  16. Mark Gottesman

    WTB: Bits and Pieces for Delta 22-540 Planer

    Hello to all, Not sure if this should be here or in classifieds, but here goes. Hope everyone is having a good holiday. I have been cleaning up and greasing the used planer I just got. Thank you all for your input in this purchase. Looks like a good machine and I have found no major problems...
  17. WoodWrangler

    WTB: 16" - 18" Bandsaw

    I've got my eyes out for a 16" - 18" bandsaw. I'd like to land another Laguna with ceramic guides, but am open for other things. At the IWF I was impressed with some of the Grizzly 17" offerings. I've also heard great things about the MiniMax -- though never used one. So ... I'm just...
  18. M

    WTB: Walker-Turner Band Saw

    I'm looking for a 16" Walker Turner Band Saw. Please let me know if you've got one or if you know of someone else who has one that might be interested in letting it go. Thanks, Andrew
  19. Dusty Sawyer

    WTB - Lathe Outboard Stand/Tool Post

    I'm looking to find a free standing tool stand for my old Lathe so I can do some outboard work. I've been using my drill press stand, but that is not going to do forever. Send me a PM if you have one available or know somebody I can bug until they give thier's up Will work for tools Thanks...
  20. Ralrick

    WTB - Yellow Board Buddies and track

    Anyone selling a set of yellow board buddies and mounting track? I saw Don (Touchwood) using these in his shop and it looks like a nice safety enhancement to reduce the chance of kickback . . . . Looking to buy from someone here on NCWW or from a retailer that might be having a sale. Let me...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top