http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=250561968048#description
Consider the 2 hr drive each way. What would you pay for this at most? I am REALLY thinking about this...REALLY!
Based on this post on Raleigh CL, We seem to be undervaluing our tools. Check out this great deal out before its gone!!
columbian bench vise - $350 (Fuquay)
Date: 2010-01-12, 12:57PM EST
Reply to: sale-2wsm5-1549202003@craigslist.org [Errors when replying to ads?]...
MODS - If a thread like this is not allowed, please delete. I'll get the point. If it is allowed... Here goes.
The time has come to upgrade my dust collection. But that is for a different post.
Currently, I have 2 Delta AP400 units. One of them is like new. I bought it last year when...
I got this from a job site where a tree service came in and done some trimming for the home owner and also cut this one down - This came from the top of the trunk where the limbs started to branch out - The trunk had a big hole up the middle - Tell me what you think -
View image in gallery...
THe former owner of our house was a WWer and built a shop that I love. He even put an window type AC unit into the back wall. I have used AC sporadically over the 14 years we have owned this place, and enjoyed it each time. But last night it was failing.
1. Given that the unit is likely 20+...
To have a Lie Nielsen or other of the expensive hand made dovetail saws? Is there really that much difference? Ranging from $100- to $250 (for the new Cosman saw) there are many choices.
http://www.garymkatz.com/OnTheRoad/HullOaks.htm
What can I say? You have to see it to believe it ...
Uhhm - Alan? I don't see a cyclone anywhere 'round this un .. 'cept maybe that green thing in the background of the last pic. What is that anyway?
http://www.antiquewarehouse.com/
This is...
The last several threads like this went south. Worth Watching. There is a potential for a lot of energy in this one.
http://www.ncwoodworker.net/forums/f87/beware-18502/
Found for sale on the Boston CL -
Delta 3HP Unisaw w/ Biesemeyer Fence - $600 (Peabody)
http://boston.craigslist.org/nos/tls/925464028.html
Let's see 1500 miles RT, truck gets 15mpg - gas ~$2 gal = $200. Refreshments = $60. Total cost ~ $860. Dang - I wished I lived closer. Oh yeah -...
So, HF has the following turning set on sale with a coupon for $38 - wondering if it's worth getting for a beginner turner. Or should I shell out the bucks for the $60 set?
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=47066
On a separate note, I'm in the process of...
http://charlotte.craigslist.org/tls/868377938.html
I have not seen if the guy still has it or not but does anyone know anything about this Bandsaw. I have a CHEAP 9" and didn't know if this is good price at $150. I am going to email the guy now and see if he still has it.
Thanks for any...
When I sold my last scroll saw, I said I was going to get a better one when I could and I still want to. I just got tired of wearing our the not so good blade holders on it. But I keep needing to do inside cuts in thin stock and wishing I had something to tide me over until I have the space and...
Hi all. New member here. I recently bought a "homemade/kit" bandsaw with 18 inch wheels and was wondering if the urethane belts are worth the expense. My top belt seems ok but the bottom one looks as if it might split at any time so was also wondering if I can replace 1 at a time or do I have to...
I got a guy who has been bugging me for these book matched pairs. Boards are red maple 4/4 x 9" wide x 8' long, I cut em @ 10" wide but they shrank in the kiln :). I think they are pretty cool and I held them back for sale, thinking I would join them together into some door panels for a wardrobe...
Ok guys, here is your chance to evaluate and put a price on a nice piece of machinery.
Since the new (old) 20" beast works great, I will likely sell my 15" Delta.
Here is a short description followed by pics, and current retail for the planer and options:
Mint condition Delta DC-380, 3 hp...
Just thought I'd share a few of the spinny things I've worked on the last few days getting ready for this week-end's show. Now that I finally have a digitial camera that resides at the shop, I'll be able to share pics more often. Needless to say, that after turning the mills and a couple of...
Like most people, I suppose, I have a good selection of dull 10" saw blades that came with my equipment hanging on the wall. All of them have carbide teeth although very thin. I am wondering if they are worth having sharpened or if it is better to invest the sharpening money in higher quality...