wet

  1. IMG_20140225_160316

    IMG_20140225_160316

    • SubGuy
    • Media item
    • 10" grinder grizzly wet
    • Comments: 0
    • Category: Member Galleries
  2. rybo

    Riving maple...uses?

    Got around to riving some of the maple logs I had lying around. It looks beautiful, and it's a very satisfying feeling to see it go from log to lumber. I know a few logs are limb wood (thanks scsmith42), but the others seems to be from the main trunk. The first things that come to mind are a...
    • rybo
    • Thread
    • green wood maple riving wet
    • Replies: 8
    • Forum: Wood
  3. S

    Hidden screw systems for decks and wet PT lumber

    I didn't want to hijack another thread, so I'm starting from this: George or others: Do you have an opinion on using the hidden screw jigs/systems with wet PT lumber? I'm considering the CAMO, but then I noticed that it creates a 3/16" gap. I haven't bought any lumber yet, but I've always...
  4. beetle's make a mess!

    beetle's make a mess!

    • eyekode
    • Media item
    • beetle maple wet
    • Comments: 0
    • Category: Turning Projects
  5. beetle

    beetle

    • eyekode
    • Media item
    • beetle maple wet
    • Comments: 0
    • Category: Turning Projects
  6. bad idea

    bad idea

    • eyekode
    • Media item
    • beetle maple wet
    • Comments: 0
    • Category: Turning Projects
  7. mihunt

    Emergency!!!!! Trade approx. 3" x 3" x 6" wet bloodwood for...

    I purchased some bloodwood from Woodcraft this week and when I cut into it it's still pretty wet. The size is approximately 3 x 3 x 6. I was wonding if anyone has anything that is dry that I can trade (Maple, walnut, darn near anything at this point) that is roughly that size (I can use 2 3/4 x...
  8. kooshball

    Power grinder vs. power wet sharpening

    I am in the early stages of assembling my sharpening equipment beyond the Arkansas stones that I already have for my bench chisels. I have recently acquired two newish hand planes and intend to keep them properly sharpened. I have done quite a bit online reading last night and feel that I am...
  9. Diamond circular saw blade - Wet/Dry

    Diamond circular saw blade - Wet/Dry

    Diamond circular saw blade - Wet/Dry
    • ehpoole
    • Media item
    • blade circular diamond dry saw wet
    • Comments: 0
    • Album: Threads
  10. CarvedTones

    started carving wet

    I took the barley twist I started at my class with the Woodwright school and started carving a snake that has a marble trail in it: It is largely complete; a marble rolls down and stops and I have set in around the head, which I will do in shallow relief. It is poplar and it was freshly cut...
  11. sawduster

    Getting my feet wet

    Been a back-and-forth kind've weekend :mrgreen: first a little scrolling, then a little turning, then a little scrolling, then a little turning, then a little turning , then a little turning , then some more turning ....well you get the picture :confused_ Glued and doweled 3 different sized...
  12. R

    wet sanding for good finish

    Hello All; Some years ago I read an article in Wood magazine about how to wet sand between coats of any brush on finish. I've used the method quite sucessfully a few times, and I wonder if anyone else has used it. Also, I have a question about the final step. At the time, the magazine stated...
  13. J

    Tile wet saw and bull nose machine $150

    Currently on RDU craigslist. Look at the motor on the bull nose machine. I think you will recognize it as a PC 3.5 HP router for $100.
  14. PChristy

    Wet turning

    Just got back from TracyP's - I know no pics didn't happen - will post some pics of what I turned soon - anyway Tracy told me to put it in a brown paper bag with the shavings and store it in the closet for about six months - I have the brown paper bag and the shavings but what I don't have is...
  15. NCTurner

    Reviews?? T10010 10" Wet Grinder Kit

    Does/has anyone used one of these? I am thinking about buying one to sharpen my turning tools with, but was looking for some reviews first. http://grizzly.com/products/10-Wet-Grinder-Kit/T10010
  16. rcflyer23

    Tool Gloat: Jet JJ-6C and HF Wet Sharpener

    Well I broke down and snagged the Jet jointer from the guy and then decided I had to have the HF Wet Sharpener after reading a few of the threads. As far as the jointer goes I did get it for $75 from him. The only thing I forgot to grab was the push paddles. I looked at HF and Lowes but...
  17. Tarhead

    Using Wet Framing Lumber

    I've got a small (4X16) expansion planned to the back of my shed for wood storage. It will be a lean-to against the back of the shed, closed in with T-111 siding. I will be getting wet, freshly sawn 2X framing lumber from Randy (Woodbutcher). Should I immediately get this lumber framed or...
  18. Douglas Robinson

    Jet 708015PK JSSG-10 Slow Speed Wet Sharpener

    Yet another Amazon Friday deal: $239.99 Enclosed motor housing keeps debris and water from the interior of the tool Variable Dial Speed Control maintains outer wheel speed regardless of sharpening stone diameter Torque Adjustment applies consistent pressure to drive shaft Oversized Water Tray...
  19. Dusty Sawyer

    Turning Wet or Dry Wood

    I just started turning and have done one project with some very dry Oak. It came out very good considering my experience level. But I just started a piece of red maple which I pulled from my land this spring and it is still pretty wet, although seasoned. I am seeing much more little tearout...
  20. C

    Work Wet or Wait??

    I got some nice AD red oak slabs from DaveO...3 3/4 inches or so thick. I milled it oversized for bed posts (3 1/4 x 3 1/4) for a Mission style bed for my son. When I ripped it on the BS, I could tell it was still a little wet (I don't have a moisture meter but it is NOT dry). The wood has...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top