veritas

  1. J

    Lee Valley Blade Shortages

    Ordered 2-3/8” plane blade and chip breaker set from Lee Valley back in May. At the time the estimated ship date kept getting pushed back every couple weeks, then pushed back to end of Aug. Now they “estimate” ship date will be Sep or end of Nov (depending on hardness). So out of stock for the...
  2. TENdriver

    Buying Clamp Racks

    I saw these racks on Lee Valley. My first thought was why would a woodworker buy a rack made out of wood? Second look, with supplies, metal bits, the Baltic Birch and finishing, maybe it’s actually a reasonable thing to buy. The design does look kind of good...
  3. Ed Fasano

    Veritas Prices!

    I was shocked today to see what folks were bidding for Veritas low angle block planes on eBay. I was shocked until I double-checked the Lee Valley prices. It looks like there have been two price jumps in the last few months! The latest change (in the past few days) took the DX60 (with a PMV-11...
  4. charlessenf

    Kudos to Lee Valley Service

    I discovered a packet of their 'Cam Clamp Mechanism 05J51.01' was missing he little Barrel Bolt. I sent them a picture of the still-sealed bag wit a polite request for a replacement. I had ordered the parts in May of 2012 and expected 'a fight.' Instead, they responded within a day or two as...
  5. Low-angle bench plane

    Low-angle bench plane

    After a proper sharpening and a few minutes of setup, it effortlessly made thin curly shavings on this red oak.
  6. Veritas Router Plane

    Veritas Router Plane

    Veritas Router Plane
  7. Ken Kimbrell

    Veritas Twin Screw Vise - $175 (Pfafftown)

    Found this in the W-S CL... there is another add as well for a cabinet scraper and burnisher. --------------------------------- Veritas Twin Screw Vise - $175 (Pfafftown) Date: 2011-09-17, 1:37PM EDT Reply to: sale-dm9vx-2603524413@craigslist.org [Errors when replying to ads?] This is...
  8. F

    Veritas medium or large shoulder plane?

    Except for cleaning dadoes, what advantage would the medium have? I would assume I could do even more with the large than I could with the medium, and it does seem to look like it fits the hand better than the medium. For the most part, I see myself using it to clean tenon cheeks and...
  9. merrill77

    Veritas Scraping plane rocks!

    I'm a bit embarrassed to admit that I've had this plane for a few years any haven't used it a lot. Looking back, I thought that since planes are, in general, much more difficult to sharpen tune than card scrapers, I would need to master sharpening a card scraper before I could sharpen and use...
  10. cpw

    WS CL: Veritas Twin Screw Vise - $175 (Pfafftown)

    Not mine. http://winstonsalem.craigslist.org/tls/2365457243.html Veritas Twin Screw Vise - $175 (Pfafftown) Date: 2011-05-06, 8:13AM EDT Reply to: sale-y4csq-2365457243@craigslist.org [Errors when replying to ads?] This is the new model with the aluminum chain cover. I just don't use...
  11. R

    veritas dual marking gauge

    http://www.leevalley.com/US/wood/page.aspx?p=67466&cat=51&ap=1 WOW! Nice looking, I'd like to hear from anyone that has acquired one and used it. (I'd show the pic, but I'm not that good.) Robert
  12. Gofor

    Mini-Tool Review Veritas Low-Angle Bevel Up Jack plane

    I said I wouldn't, but then I did. Went looking for that Narex Chisel deal at Lee Valley and ran out of $$ before I got 'em. Happy Birthday to me!! Came away with this: As you can see, I added a couple irons so it could be all that it could be, and besides, they will also fit the wooden...
  13. Travis Porter

    NCWW Raffle - Item Description Veritas Medium Shoulder plane

    Check it out. This is one sweet plane and it could be yours for the price of a rafle ticket. Hey, if you win it and don't want it, I will give you $50 for it as it retails for $175 and I am not eligible to participate in the raffle.:tinysmile_cry_t: From the manufacturer: A...
  14. Mr. Lahey

    Veritas Wheel Marking Gauge-opinions?

    This looks like a really nice gauge, I'm thinking of ordering one. I really like the fact that you can get it graduated. Anyone have one of these? http://www.leevalley.com/wood/page.aspx?c=2&p=59455&cat=1,42936
  15. R

    Veritas new Detail Rabbet Planes

    http://www.leevalley.com/wood/page.aspx?c=2&p=64808&cat=51&ap=1 These look nice. If anyone picks one up please report back on using it.
  16. S

    Veritas scraper burnisher users out there?

    I took Steve Coles most excellent advice on getting a Veritas scraper burnisher for turners as below..... http://www.leevalley.com/wood/page.aspx?c=2&p=20266&cat=1,330,49233&ap=1 ....and it has opened an entirely new door for me to use my scrapers for 220 grit finishes. Thank you Steve. I was...
  17. Raffle 09 Gloat

    Raffle 09 Gloat

    DX-60 slumming with the old ones
  18. Raffle 09 Gloat

    Raffle 09 Gloat

    DX-60 with Sock
  19. michaelgarner

    Do you have a Veritas Bevel Setter?

    Just wondering if anyone has one of these? http://www.leevalley.com/wood/page.aspx?c=2&p=52403&cat=1,42936,50298 If you do send me a PM becouse I have a couple questions, I need some help.
  20. michaelgarner

    Veritas Twin-Screw Vice parts

    Hello friends, Well I am almost done with my bench. I installed the Twin-Screw Vice and everything was going awesome on the instillation. But when it was time to put the chain on I realized that I was missing a part for the chain, I am missing the "Full-Link" to be able to connect the chain. I...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top