veneer

  1. Walnut Arts & Crafts Dresser - End View

    Walnut Arts & Crafts Dresser - End View

    Another end view showing the veneered walnut burl bookmatched end panels
  2. I

    1/4 sawed Red Oak 1/5" veneer ??

    Thanks to Jeff I have a ton of !/4 sawed Red Oak. I am considering building a Mission style Dresser; however. planing and glueing-up this wood for side panels seemes like a waste and also heavy. Question? Is there a such a thing as 1/4 sawed Red Oak :dontknow: veneer, and if so where might I...
  3. MrAudio815

    Rich Cherry Veneer & Primavera inlay

    Ashley Furniture Buffet & Hutch (Gorgeous) http://raleigh.craigslist.org/fuo/838071116.html
  4. R

    Veneer Is Giving Me A Headache

    :eusa_thin I could sure use some help here. I just acquired a dining room table set for my next project. I have not yet refinished anything with veneer. The table top is a beautiful design like pie wedges circled by a solid band. The problem this piece is in bad shape. The clear coat and veneer...
  5. Bas

    Veneer help

    Last year, I needed some 1/2" cherry stock for a little magazine stand. Rather than planing down the 4/4 stock, I resawed a few pieces, with surprisingly good results. The resawed boards have been lying around since then, until I decided to try veneering some 3/4 plywood. It came out really...
  6. sapwood

    Refinishing Walnut veneer speaker

    Decided to sand out scratches and refinish veneer on a pair of speakers. So I hand sanded (220 grit) trying to avoid sanding through veneer. I was going to use Watco Danish Oil (walnut or dark walnut), but now I'm wondering if that will even out the color. Will the Danish Oil even out the...
  7. woodnick

    Veneer subtrate

    I've got a question that may not have a correct answer. What is the best substrate for veneering? I'm thinking Baltic birch or MDF?:dontknow::icon_scra:eusa_thin
  8. JackLeg

    Veneer Tips?

    When you apply thin strips to shelf edges (for example) do you usually mitre 45's on the corners or just make butt joints? I have NO experience with this and am trying to finish up some shelves for LOML birthday today. HELP! (and quickly, please!) :notworthy:
  9. mshel

    Vacuum bag veneer

    I finally got my vac bagging system setup and used it to re-veneer this antique table with Rosewood veneer. I really held up on doing this until I had the system setup because I really didn't want to screw this job up. The veneer alone was $315.00 so you can appreciate my concern. Here is the...
  10. Larry Rose

    Peel and stick veneer

    Has anybody used Rocklers peel and stick veneer? I just bought some and want to use it over a substrate of Birch plywood. The instructions mention sealing the wood first. Are they talking about just porous woods or all woods and will thinned shelac do the trick?
  11. NZAPP1

    Thanks Tarhead for the Veneer Shuttle Service

    I would like to thank Mark (Tarhead) and his daughter Beth. They picked up and transported veneers from Roger (Timsparents) to Apex. Once again the North Carolina Woodworker express rides again :icon_thum . It is this kind of people that make this the best woodworking site on the web :notworthy...
  12. DaveO

    Best way of joining 4-way book matched veneer

    I decided to challenge myself and make a 4-way book-matched veneer panel as the top to my next jewelry box. Any good suggestions on jointing the veneer to get good seams? Dave:-)
  13. Dartboard cabinet

    Dartboard cabinet

    A cabinet for an electronic dartboard. Red oak sides, pau ferro veneered front (mahogany veneer on the inside of the doors). Handcut dovetails on all of the corners.
  14. R

    veneer strips on turned projects

    Have any of you tried applying veneer trim strips to turned projects like pepper mills and bowls? I purchased a book on the subject but it turned out that it was more about turning the object than applying the veneer. Do you have to wet the strips so they will bend around the radius?:BangHead:
  15. Vacu-Clamp

    Vacu-Clamp

    It simply works off of my compressor.
  16. Vacu-Clamp

    Vacu-Clamp

    This Vacu-clamp system works very well for the small veneer projects I work on. It simply works off of my compressor.
  17. Veneer Press

    Veneer Press

    Homemade veneer press.
  18. Veneer Press

    Veneer Press

    Homemade veneer press.
  19. Veneer Press

    Veneer Press

    Homemade veneer press.
  20. Veneer Press

    Veneer Press

    Homemade veneer press with Melamine platens.

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top