thick

  1. zapdafish

    5/8" thick MDF

    Anyone know other possible suppliers in the Raleigh area? Lowes and Home depot dont carry it. I had one heck of a time on the phone trying to explain what I needed at Lowes, the guy kept saying we only carry it in 4x8 :BangHead: I want to experiment with veneered cabinet doors, 1/2" is too...
  2. zapdafish

    5/8" thick MDF

    lowes and Home depot dont carry it.
  3. bluedawg76

    egde joint 1/2" thick stock

    I'm planning on making some keepsake/ jewelry boxes for family for the holidays (they're coming up fast). Rough dimensions are ~5" x 7", 4-5" high using 1/2" thick stock. Digging through my scrap bin, I've got some nicely figured, but narrow 5/4 maple boards I'd like to use (~2-3" wide). My...
  4. R

    Need some wide thick cherry

    I am in the process of starting a rather large cherry linen press. The upper case will have two raised panel doors with the panels being about 20" wide each. I would love to make each of these out of bookmatched cherry. Does anyone know where I can find some 10/4 cherry at least 10" wide and...
  5. woodArtz

    Looking for thick Walnut bowl blanks

    I'm in the process of turning some large salad bowls and I've finally exhausted my supply of thick-wide Walnut lumber. I need something about 4" thick by 10" to 14" wide. I know I'm asking for a tough one. PM if you have something available :icon_thum. Thanks!
  6. NCTurner

    1" Thick UHMW

    UHMW Cutting block material 1" thick, 4 pcs. (Angier) Date: 2010-04-30, 3:06PM EDT Reply to: sale-knzt4-1718165558@craigslist.org [Errors when replying to ads?] 1" thick, white, UHMW Cutting Board material. 4 pcs. to sell. Good condition, new material, unused. 1 pc. – 24” x 36” x 1” thick...
  7. S

    Ridgid 13in Thick Planer - $200 (Fuquay Varina)

    Not mine! http://raleigh.craigslist.org/tls/1634818674.html Ridgid 13 - $200 (Fuquay Varina) Date: 2010-03-08, 5:26PM EST Reply to: sale-k8xxy-1634818674@craigslist.org [Errors when replying to ads?] Ridgid 13" Thickness Planer Good Condition- Includes Stand $200 Location: Fuquay...
  8. CrealBilly

    Krylon Triple Thick Crystal Clear Glaze

    What's the low down on Krylon Triple Thick Crystal Clear Glaze? Seems like good stuff for sealing but figured I would ask those in the know before I apply it to anything good. Thanks
    • CrealBilly
    • Thread
    • clear crystal glaze krylon thick triple
    • Replies: 3
    • Forum: Finishing
  9. NCTurner

    RL CL: UHMW - 1/2" and 1" thick (Angier)

    Cutting Board Material - UHMW - 1/2" and 1" thick (Angier) Reply to:sale-q2qbu-1185156308@craigslist.org [Errors when replying to ads?] Date: 2009-05-23, 11:35AM EDT 1 piece of 1" thick, white, UHMW sheet for sale. 36" x 48". Would make a fantastic cutting board, or 2, or a nice, big, fish...
  10. scsmith42

    Thick MDF

    I have a 4' x 9' assembly table that's topped with 7/8" MDF. Unfortunately during the construction of the new shop some of my "former" farm hands left it outside in the rain, and the top kinda did the hootchy - kootchy all over the place. Can anybody advise me where the most economical place...
  11. C

    Thick AD Walnut

    I picked up some AD walnut that has been drying for a very long time. Thickness varied from 2 1/4 to 3 1/4 inch, widths from 5 to 11 inches. Here it is on my 12' Trailer, about 16 sticks... I lightly planed to color grain match. Here's a few pics. The camera doesn't...
    • cpowell
    • Thread
    • thick walnut
    • Replies: 11
    • Forum: Wood
  12. K

    1" Thick Red Oak Ply

    Anyone know any where to get some stuff about 1inch thick. Little thicker would be better unless its already planed / semi-finished. Live in the raleigh Area. Starting an entertainment system / dresser and need at least one sheet of 1" thick stuff for two layers and some thinner stuff that I...
  13. CarvedTones

    small pieces of thick steel plate

    I need a couple of small pieces of 1.25" or so thick steel plate. By small I mean really smalll - 3" x 2" and 2" x 2". They need dead flat parallel faces. EDIT - Oh yeah - Cary/Apex/Raleigh area.
  14. L

    Looking safe method of cutting 3" thick walnut

    I am making a trestle table with walnut and have completed the feet. The slab I am attempting to cut for the trestle top is just under 3" thick and over 8" wide. My final needs to be 5" and my jointer only handles 6" so you see my problem. The tablesaw ripped the legs without a problem because...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top