source

  1. farmerbw

    Local, Ral, Sheet Steel Source?

    Anyone know of a local, Raleigh area, source for sheet steel? Perhaps other than Dillion Supply? I've got a bro looking for some 3/8" (preferred) or 1/2" thick sheets of AR400 or AR500 sheet steel. I guess the only requirement be that the sheets fit in a 1/2 ton pickup. TIA, Brian.
  2. TracyP

    New Lathe From The Woodworking Source

    The wait is now over and I could not be happier. Shop Fox 1758 Lathe from Rick DiNardo. Thanks Rick. This is a sweet lathe. I have been enjoying it already. The burl is from PChristy. Thanks Phillip. If you are on the fence about a lathe this is a good lathe at a good price.
  3. ashley_phil

    Wylie Coyote's source found!

    http://charlotte.craigslist.org/tls/980684730.html $150& up 50-220lbs call for more info 843.672.7387
  4. SSuther

    Mooresville Hardwood Source- Tools, Too!

    I just came back from buying some nice rough walnut lumber from one of our members, Rick DiNardo, who operates The Moulding Source in Mooresville. I'd been wanting to find a source convenient to Mooresville and remembered the list on NCWW site. The Moulding Source is listed, so I called them...
    • SSuther
    • Thread
    • hardwood mooresville source tools
    • Replies: 12
    • Forum: Wood
  5. TracyP

    First Customer For The Woodworking Source and a New Drill Press For Me.

    I have been wanting a new drill press for sometime to replace the benchtop drill press that I got on clearance at Lowe's. I went to see Rick DiNardo at the new woodworking store that is set to open soon and came away a very happy camper. Well the store is not open yet and he sold me the drill...
  6. ashley_phil

    3/4" Acetal Rod - Local Source in Cornelius

    I found this company on a internet search a few weeks ago. They have all sorts of plastic sheets and rods. I wanted some for bushings for the pen turning I need to start on with Christmas fast approacting. The source Alex told me about was sold out and I waited too long to get the special from...
  7. ashley_phil

    UHMW Source

    I don't know that this is a great price, but it's not bad. And I always hear folks say where can you get that slick white stuff: http://www.ptreeusa.com/edirect_090508.htm Anybody in Charlotte wanna go in on a a 3/4" sheet? I jsut need one for now and just a bit of it to make some temp...
  8. CarvedTones

    Reasonable, semi-local pinned blade (and other blades) source

    For others struggling with one of these little saws: or similar, here is a source in VA for blades with an amazing selection (3 different ones :roll:): http://www.scrollit.com/Olson%20Scroll%20Saw%20Blades/Olson%203%20inch%20Pinned%20blades.htm
  9. CarvedTones

    Fiberglass salvage or alternate source ideas

    I need a few oddball pieces of fiberglass for some work I am doing on my sailboat.I could use other materials but I would prefer solid fg if I can find it. One is that I need 3 or 4 feet of pipe/tube that has an ID of around 1.5". I actually need a couple of 1' pieces and one or two that are...
  10. jaustin

    possiably need a source for some 1x6x6

    anyone have a good source for 1x6x6 for privacy fence? maybe cedar or other wood that would be good for fence. i have about 350 feet of fence to do.
    • jaustin
    • Thread
    • possiably source
    • Replies: 1
    • Forum: Wood
  11. mshel

    Another bandsaw blade source

    Via some information from a friend, I got up with a small family run company in Maury, NC. They make up bandsaw blades, sharpen saw blades, router blades, etc. I ordered some blades on Tue, got them on Wed and unfortunately, the tooth pattern wasn't what I was looking for. I called the guy...
  12. skysharks

    Need a source for hardware

    Hey all Thanks to Clowman :icon_thum(where ever he may be):embaresse. I am in the process of building my first bed. Oh can't forget Pete301 :icon_thumfor the fine Delta Mortiser that I purchased from. And of course my good buddy Jeff :icon_thumfor the Quarter Sawn Red Oak. However it seems that...
  13. B

    Source for door skins

    I am refinishing some interior slab doors. Some of the doors need to build up slightly to consistent thickness. So, where can I find door skins in or near Durham? I like to get the thin 'stuff' about 3/32 or so thickness. Any hint, tip, advice is appreciated! Cheers, Bernhard
  14. JackLeg

    Blast Gate Source?

    There has probably been more said about the topic of dust collection than anything I've read on here. So---- I'm ready to stop "biting the dust" and install a collection system. I presently own a simple Delta single stage system and a good Delta fine particle unit. So, here's my question for...
  15. J

    good source for long (18') Western Cedar

    Know of any?
    • jeff...
    • Thread
    • cedar good long source western
    • Replies: 11
    • Forum: Wood
  16. J

    New Tool Source

    Hey All, Here's a new tool source that I just found out about, maybe others have heard of them, they have a nice catalog. www.mannyswoodworkersplace.com They have alot of measuring tools and also cater to the Dark Side. Now everybody knows that I don't go to the dark side yet, But like...
  17. nelsone

    Smoked Glass Source?

    Does anyone know of a good place around Charlotte to get some smoked glass for a TV stand I have been asked to make? I will need the glass cut to size and drilled for the overlay hinges. Thanks!
  18. Jim Murphy

    6" PVC D-2729 pipe source

    John Deere Landscapes of Apex, at 919-303-7290 is a stocking dealer for Cresline pipe, and can order the PVC you need for your dust collection system. The Cresline part number is 52155. Here's the Cresline datasheet for the pipe...
  19. T

    Need source for jewelry box trays/inserts

    I need to find a source for plastic (or wood/fiberboard), flocked jewelry box trays/inserts. They don't have to be real fancy, just flocked or covered so I can skip that part of it. I used to get them at Woodcraft but they don't have them at our local store and I can't find them on their site...
  20. rick7938

    Wood Source for Beginner

    I am a relative beginner to the woodworking field. My neighbor had been helping me get started and had provided some nice wood from his stock, but he has gotten out of woodworking because of his health and his wood stock is gone. I am looking for a wood resource in the Fayetteville/Raleigh...
    • rick7938
    • Thread
    • beginner source wood
    • Replies: 8
    • Forum: Wood

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top