size

  1. J

    Band Saw: What size? (Different Project)

    I started a thread asking about any shop around to cut me a whole pile of cedar strips: http://www.ncwoodworker.net/forums/showthread.php?p=85566#post85566 But I'd like to know what you all think about what size band saw a guy would need to cut a whole bunch of of cedar strips cut to 1/8" x...
  2. J

    Band Saw: What size?

    Greetings all. Man it's been a while since I posted. Anyway, I have a project where I'll be cutting shapes from 3/4" plywood. I'll be cutting about 15-20 pieces that are about 25" in diameter. My space is limited and I won't use the band saw much beyond this project for anything over 1/4". So...
  3. P Crews

    mandrel size

    I want to start turning pens. I've been looking at the different starter kits from several companies and will most likely go with the starter kit from Penn State. The problem is I can't figure out what mandrel size I need. I have a HF model 45276 lathe and it has a 3/4 X 10 TPI headstock and...
  4. taandctran

    what type and size of work shop do I need

    I am wanting to upgrade from my small shed workshop. I want one, not huge, but a good size that I will never outgrow. What is a good siz for a home workshop? Also what type of material do you recommend (metal, wood, block, ect.) I think a cement floor would be best. Right?
  5. L

    Wall cabinet size

    I am in the planning stages for wall cabinets that will go up against the pantry cabinets I have just about finished. I have an available space of 40" for the wall cabinets to the left of the pantry, the pantry going in a corner. I plan roughly a 12' opening on the far end for wine bottles and...
  6. NCPete

    biscuit size?

    perhaps I could find this in the owner's manual for my biscuit joiner, but I haven't looked yet, and this was a reason to get out of the hot shop for a few minutes and surf NCWW. :-D:-D. What size biscuits in 3/4" MDF? I recall seeing something about 'blisters' forming, and I forget what the...
  7. SteveColes

    Max Picture file size

    The total of all 5 pictures that can be uploader at one time is now back to 16 MB. Sorry that it was reduced. It was an oversite when changing servers
  8. SteveColes

    Changes in picture size constraints!

    There was a constraint when uploading pictures using the upload form with spaces for five pictures. The constraint was the total of all pictures uploaded at time, must not exceed 2MB. My hoster has removed this constraint, after many requests and then threatening to hold my breath until I...
  9. DaveO

    NYW router table size

    I am thinking of making a router table similar to the NYW style. Of course I don't have a plan nor want one but if someone has made one I would appreciate the basic outside dimensions. Also I am fairly tall (6'3"), so I tend to make things taller for my shop, anyone have any thoughts on how well...
  10. DaveO

    Pen blank size

    What size pen blanks do y'all use? The main reason I ask is that I have many pieces of curly maple that I miscut, or left as off-cuts, and that are really too small for me to use as scrap. If they are large enough to be used to make some pens I would be willing to give then up to anyone who...
  11. SteveColes

    What are the picture size constraints?

    1. Contrary to popular opinion, there are NO upload constraints on pictures based on its pixel size, for example 2048 x 2048. So long as as the per picture file size is less than 2MB, the system will accept it. Then if it is larger than 800 x 800, the system will produce a copy of the picture...
  12. SteveColes

    Photo size

    I noticed thst someome mentioned that pictures shown on this site were too big, and there was some discussion about what size the pictures are. So I just wanted to point to this thread where I sort of explained how this works. Please note that the rezise size that is currently 800 can be...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top