screw

  1. image126

    image126

    • Graywolf
    • Media item
    • screw twin vise
    • Comments: 0
    • Album: Photos from the shop
  2. Bent Spindle Screw

    Bent Spindle Screw

    Bent spindle screw from my Delta LA200 Lathe
    • mckenziedrums
    • Media item
    • screw spindle
    • Comments: 0
    • Category: Member Galleries
  3. L

    Spring hinge screw

    I need your help finding spring hinge screws. I will explain its use. I am making a cross stitch floor frame. The work piece will be held together with these two screws. Looking down on the one application you will see four pieces of wood with a screw head on the far left of the four pieces with...
  4. sawman101

    Dressing Blade Clamp Screw on DW788

    I experienced a lot of blade breakage on my DW788 awhile back. The blade clamp screw must be flat to work correctly, and my attempts at hand dressing them just wasn't good enough. I found a quick and simple way to accomplish this task. I took a piece of hardwood, approximately 1/4" thick. The...
  5. Ken Kimbrell

    Veritas Twin Screw Vise - $175 (Pfafftown)

    Found this in the W-S CL... there is another add as well for a cabinet scraper and burnisher. --------------------------------- Veritas Twin Screw Vise - $175 (Pfafftown) Date: 2011-09-17, 1:37PM EDT Reply to: sale-dm9vx-2603524413@craigslist.org [Errors when replying to ads?] This is...
  6. Mike Camp

    Kreg Pocket Screw Joints - To Glue or Not to Glue?

    I'm going to embark shortly on building some kitchen cabinets and I was wondering what most of you all do when it comes to Kreg pocket screw joints. Do you follow the "Kreg way" and not use glue at all or do you use glue?
  7. drw

    Plugging Screw Holes?

    I am working on a wall-hung cabinet for my shop. Although the work has been slow, for the most part I am happy with the results. That said, one of the cabinet doors is very slightly off, I have tried to ignore it, but it is the first thing I see every time I walk into the shop. In order to fix...
  8. cpw

    WS CL: Veritas Twin Screw Vise - $175 (Pfafftown)

    Not mine. http://winstonsalem.craigslist.org/tls/2365457243.html Veritas Twin Screw Vise - $175 (Pfafftown) Date: 2011-05-06, 8:13AM EDT Reply to: sale-y4csq-2365457243@craigslist.org [Errors when replying to ads?] This is the new model with the aluminum chain cover. I just don't use...
  9. S

    Hidden screw systems for decks and wet PT lumber

    I didn't want to hijack another thread, so I'm starting from this: George or others: Do you have an opinion on using the hidden screw jigs/systems with wet PT lumber? I'm considering the CAMO, but then I noticed that it creates a 3/16" gap. I haven't bought any lumber yet, but I've always...
  10. Joe Scharle

    Pocket screw bookcase how to videos

    I built 3 the same way. Very easy. http://kregjig.ning.com/forum/topics/kreg-jigr-project-plan?xg_source=msg_mes_network
  11. IMG_01222

    IMG_01222

    • eyekode
    • Media item
    • lv screw tail vise
    • Comments: 0
    • Category: Tools & Equipment Photos
  12. IMG_01212

    IMG_01212

    • eyekode
    • Media item
    • lv screw tail vise
    • Comments: 0
    • Category: Tools & Equipment Photos
  13. kooshball

    Veritas 24" twin screw vise vs. dead man??

    Ok, I know some of you have the Veritas 24" twin screw vise; so is the assumption true that unless you are trying to support an entire tree that a dead-man becomes unnecessary? I know the official answer is "it depends" but give me some context as to what you have successfully secured vs...
  14. kooshball

    I cheated, now I feel dirty please tell me it is OK before I pocket screw everything!

    So I was looking at the calender and realized that if I wanted to get the rest of my federal tax credit for energy efficient upgrades that I only have until the end of the year to install 4-windows, 1-entry door and reside my garage. Then I looked at the status of my current woodworking project...
  15. eyekode

    Make a vise out of a ball screw?

    I was wondering if anyone has ever made a wagon wheel vise or similar out of a ball screw? They could definitely take the load but can they take the dusty environment? Just wondering because I came across these: http://www.sciplus.com/category.cfm/subsection/19 18" long, 1x4TPI ball screws for...
  16. eyekode

    Wood screws: Moxon double screw vise and thread for leg vise

    Thanks to Tom (toolferone) I got the chance to use a Beall wood threading kit like this one: http://www.bealltool.com/products/threading/bigthreader.php Pretty cool kit. Especially the tap that has a guide in front of the threads to make sure you are taping in line with your pilot hole. First...
  17. CatButler

    Too much play in vise screw

    I attempted to make a twin screw vice (not synchronized like lee valley) using a couple of vise screws, but the outer face has too much play and doesn't hold boards that aren't very deep well. One thing I did wrong was I didn't taper the the outer face. I have now fixed that, but I would still...
  18. Touchwood

    Rockler Hand Screw clamps...on sale

    Hi All Just got a Toolguyd email...Rockler 8" Hand-screw Clamps on sale for $4.99 ..including shipping with coupon V0768. Regular price $10.99 plus shipping. Not bad if you need them.:eusa_danc Don
  19. Mr. Lahey

    Painting screw heads?

    I'm working on a project that uses very small black screws. I could not find black screws, so I will have to paint the heads. I've tried this before and not been very successful. The paint tends to collect in the screw head, and tends to come right off when driving them. What would be a good...
  20. CarvedTones

    Hand screw clamp making social? What happened to that plan?

    I am referring to this: http://www.ncwoodworker.net/forums/f23/update-1st-post-re-getting-together-make-some-handscrew-clamps-26084 Last I remember, we were nailing down an Feb date. But I have not heard anything lately.

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top