scraps

  1. HMH

    Looking for Lexan scraps

    I need a long thin piece of Lexan (not acrylic, I'll be bending it to an approx 20" dia.), 8"x64"ish for a project I'll be working on shortly. The box has full sheets that will give me the 64"ish +, but that leaves me a lot of waste that I cant foresee a need for in the near future. Those full...
  2. F

    Scraps for a cutting board

    I was just going to order some off that new fangled world wide web, but i figured i could ask here. Would anyone have any walnut/maple (or similar) scraps they would be willing to part with for a modest price? I'm going for a 12x18 sized board :occasion1
    • Fred85
    • Thread
    • board cutting scraps
    • Replies: 1
    • Forum: Wood
  3. MrAudio815

    Thanks For the Exotic Scraps~!

    Hey All, Just wanted to say thank you to those who sent me some of their Exotic Scraps~! It is greatly Appreciated~! :eusa_danc :notworthy: :eusa_danc Here is a picture of what I received from CDpeters (Chris) approximately 3/4" x 1/4" x 6" for the long pieces. YES~! :icon_thum...
  4. MrAudio815

    Exotic Scraps needed

    Hey all, I'm looking for smallish scraps from 1/4" sqaure by 12" long of various exotic hardwoods that are colorful (looking for Purpleheart, Yellowheart, Bloodwood, Padauk, etc.). This is for Jewelry for the LOML, and family gifts. I can also use scroll saw scraps, 1/16" x 1/4" x 12"....1" x...
    • MrAudio815
    • Thread
    • exotic needed scraps
    • Replies: 13
    • Forum: Wood
  5. J

    Scraps

    Hey, all. I'm looking for smallish scraps of various dark hardwoods (emphasis on teak and mahogany) and juniper. This is for ship modeling. Maybe we can work something out? Thanks much in advance John.
    • jdulaney
    • Thread
    • scraps
    • Replies: 11
    • Forum: Wood
  6. rcflyer23

    Red Oak Lumber Scraps for the Hobbyist (Charlotte)

    Not Mine but I did ask him average length and he said about 2ft. Might be a good deal for someone. http://charlotte.craigslist.org/art/2214919856.html Date: 2011-02-14, 8:11PM EST Reply to: sale-untey-2214919856@craigslist.org [Errors when replying to ads?] I have a pallet of...
  7. Truefire

    Pine 4x4 scraps anyone? not pressure treated...

    Do any of you by chance have some white or yellow pine 4"x4" x 5-6" pieces cut off from some air dried beams or such. I will be needing approximately 3-4 pieces, you give me a price via PM and you could ship it via a flat rate box if you wouldn't mind? Thanks a million! Chris
    • Truefire
    • Thread
    • 4 x 4 4x4 beam column pine posts pressure scraps treated
    • Replies: 6
    • Forum: Wood
  8. froglips

    Wanted: Poplar or Soft Maple scraps...

    If you are like me (my deepest sympathies), you save your scraps. I'm working on a little Mortise chopping evening for the Hillsborough Orange Woodworkers group. We are "pretending to make table legs". So, looking for stock on the order of 1 1/2 to 1 3/4 square, 8" to 10" length...
  9. danmart77

    Jelly Cabinet: pine scraps used

    View image in gallery View image in gallery Here is a shaker style cabinet I have made before. Its a nice size for moving around and its light weight. All of the shelves are joined scraps and planed to 3/4" so you can get rid of stuff in the box. The molding around the top is just simple...
  10. R

    Quick gift from scraps

    Like all woodworkers, I have loads of scraps that I can't bring myself to throw away. So I glued a few of them together and cut some holes in the glue-ups to make quickie candle holders. View image in gallery I made a half dozen of these from cherry, walnut, canarywood, oak, and sassafras...
  11. T

    Where can I find Plastic Laminate scraps

    Looking for "small" pieces (less than a full sheet) of plastic laminate int he Charlotte area. I do not feel like purchasing an entire sheet from the big box store. thanks
  12. S

    Mitered Scraps of Art

    While working on my first picture frame, I kept the mitered ends, because I liked their geometry. I was so smitten, I decided I had to make something out of them. I came up with this: View image in gallery I also had the the remnants of cove from the frame that I used to "frame" the...
  13. E

    maple, beech, hickory, walnut scraps

    I need 3/4 or 4/4x2.5x12" scraps of most any hard, tight-grained wood. I make chairmaking tools (handtoolwoodworking.com to see them). If someone is milling any of these woods and can convince me that they aren't infested with powder-post beetles, I would also be interested. Thanks, Elia
  14. D

    Stump Scraps

    I usually save most of the bigger pieces I cut out of a log when I'm making a stump table. No idea why, just seems like a waste to toss it out or burn it. After sitting around for a few months, I had an idea pop up so I gave it a try. I think in some locales these would be called "Objects d'Art"...
  15. flatheadfisher

    Good Use of Scraps

    I had lots of small scraps left over from making all of the colorful cutting boards using 8 different species of wood.I have a nephew who is three years old and I wanted to give him a unique gift. So, I cut the scraps into different size blocks and sanded them smooth. My wife painted lots of...
  16. Truefire

    Desiring to purchase cocobolo, bloodwood and such: scraps

    Hello guys I am looking to buy some turning stock of bloodwood,cocobolo,zygote,padauk and such. I need scrap pieces of 1"x1"x at least 6" long or longer and pieces measuring 1.5" -2" x 1.5"-2" x at least 6". Give me a price. Thanks, Chris. :help:
  17. Truefire

    wanting to buy bloodwood,cocobolo,zygote scraps

    Hello guys I am looking to buy some turning stock of bloodwood,cocobolo,zygote,padauk and such. I need scrap pieces of 1"x1"x at least 6" long or longer and pieces measuring 1.5" -2" x 1.5"-2" x at least 6". Give me a price. Thanks, Chris.:help:
    • Truefire
    • Thread
    • bloodwood buy cocobolo scraps wanting zygote
    • Replies: 5
    • Forum: Woodturning
  18. Truefire

    Wanting cocobolo,paduak,bloodwood scraps

    Hey guys I am wanting to buy some turning blank stock from your scrap pile so to speak. I want some cocobolo, padauk, and bloodwood in 1.5" x 1.5" x 3.5"-4" lengths or longer and some pieces 1.25" x 1.25" x 4". Shoot me a response and tell me what you want for it. I will pay for the wood and...
  19. DaveO

    Fun with scraps....

    I've been meaning to upgrade my drill press table for a while. So with a rainy day, a little spare time, and some scraps from other projects. I cobbled together a new drill press table, fence and light system. The table is some scrap 3/4" BB ply with a hardboard surface, and Padauk edging...
  20. dino drosas

    Save Those Scraps

    Just when you thought you were getting pretty good and then this. Welcome to the Manufacturing Forum: Miniature dovetails without machines The lyf so short The craft so long to lerne

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top