scrap

  1. nicemac

    Freud FT2000e Parts (NON) Availability-Brushes needed!

    I have a Freud FT2000e router in my table. This weekend, one of the brushes took a dive. It came apart and there is nothing left of it. No problem, I called Freud this morning to geta new set not eh way. No dice. "Haven't had anything for that router for 4 or 5 years…" The rep told me that...
  2. Timmy

    Scrap Wood Project- Coffin Candy Dish

    If you have the day off today, or even 2 hours after work, you can easily build a small coffin candy dish and use up some of the scraps in your shop. This has an easy to remove top and is just the right size at 15" long by 6" at its widest point. Also, no need to measure angles as I show you how...
  3. scrap

    scrap

    scrap
    • PeteM
    • Media item
    • scrap
    • Comments: 0
    • Category: Member Galleries
  4. CatButler

    Solid core doors available at the Scrap Exchange in Durham for $25

    If you go get one, pick up one for me too.
  5. Truefire

    Looking scrap piece of solid countertop material

    Hello guys, i am looking for a scrap piece of solid type countertop material approximately 18"x30" in size. Either segmented solid Red Maple countertop material, Corian, or solid granite type material. I was wondering if any of you guys install countertops professionally and would have scrap...
  6. froglips

    Milling small box parts from random scrap......

    Whilst working with HOW on making boxes, I think I invented/remembered a neat idea to use up small parts. Short story, Max donated a tone of oak shorts (some as short as 4" long). Great parts for making little boxes....... But, to use box joints and/or router dovetails, we needed some...
  7. Bugle

    Workbench from "scrap"

    We all know it's not really scrap, or as someone on here says, "It's not scrap until I say it's scrap.". We replaced our kitchen counter tops several years ago and I kept the top from the island knowing I would do something with it someday. I also had some treated 4x4's from a fence that was...
  8. scraproomwall2

    scraproomwall2

    Rollable cubby hole stack
    • scottj
    • Media item
    • room scrap wall
    • Comments: 0
    • Album: Scrap Room
  9. scraproomwall1

    scraproomwall1

    Rollable cubby hole stack
    • scottj
    • Media item
    • room scrap wall
    • Comments: 0
    • Album: Scrap Room
  10. scrapwood

    scrapwood

    scrap wood
    • jhreed
    • Media item
    • scrap wood
    • Comments: 0
    • Category: Member Galleries
  11. scrapwood

    scrapwood

    scrap wood
    • jhreed
    • Media item
    • scrap wood
    • Comments: 0
    • Category: Member Galleries
  12. T

    Scrap bin

    Well after giving away my large rolling lumber cart I was left with many scraps. I went in the shop today and the tool I needed was behind that pile of scrap. I decided I was not going to move the pile again, so I stopped what I was doing and knocked together this bin in about an hour. I wrapped...
  13. zapdafish

    looking for laminate scrap

    Anyone seen a borg in the raleigh area with a scrap bin of laminate? Looking for a 3 x 4 sized piece for a router table top. I found a supply in Durham via craigslist thats pretty cheap but hoping to avoid having to drive all that way for it. thnx...Steve
  14. S

    Need a piece of scrap walnut

    I need a piece of scrap walnut, just big enough to make a knife handle for this gut hook folder I have been working on forever. About 2"x6"x1/2" or so would work. Or if someone some other type thats dark in color that would work.
  15. S

    saved from the scrap pile

    .
  16. CarvedTones

    ~18" long scrap of cherry (resolved, thanks!)

    I am still working on that long term plan to start selling handmade historically inspired musical instruments. I have been turning and carving some medieval woodwinds in maple and I will soon have 3 for my gallery. The primary woods I am planning to work in are maple and cherry initially and I...
  17. TheLazyC

    Pen Kits arrived, 2 more scrap pens

    So I think I would be better off turning my wood working to something like, cutting firewood! I was so excited about getting my next set of pen kits and blanks. 11 cigar kits. I cut the blanks to length with my new band saw, glued the tubes in and tuned the radio in to the Wednesday night...
  18. G

    scrap walnut

    not some of my best work...but there really is no such thing as scrap anything. this was done with some walnut and finished with deft. stands 6 inches and is 5 inches in diameter. Picture is pretty bad. it was taken with a cell phone. View image in gallery
  19. NCTurner

    Scrap Ply (Hillsborough)

    Scrap Lumber (Hillsborough) Date: 2010-02-06, 4:46PM EST Reply to: sale-dtjpy-1589227913@craigslist.org [Errors when replying to ads?] I've got some sheets of plywood, some 2x4 and 2x6 scraps to give away. It's been cut up, but there's still some good wood here. Location: Hillsborough...
  20. Sawdust Denny

    Think Green With Kiln Dried Scrap

    A local lumber wholesaler grades kiln dried lumber in their warehouse and sells the cut off as fire wood. I have found these scraps to be great for small projects and can also be used for smaller pieces like drawer parts on large projects. This saves having to cut small pieces out of longer...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top