sander

  1. PChristy

    24" Drum Sander - $850 (LincolntonNC

    24" DRUM SANDER made by Woodtek Tools, Inc. 5 HP, 1,725 rpms motor...all made in the USA 37 1/2" x 33" x47", mounted on a 38" x 43" pallet. Runs on 220 or 110 volt. $850.00 ...obo. Good condition. http://hickory.craigslist.org/tls/1219517620.html
  2. jamie

    Jet 10/20 sander (?)

    Hello again! Does anyone have any experience with the jet 10/20 drum sander? Is it a worthwhile machine? I understand its capacity limitations, but is it any good, or should I steer clear? thx!
  3. Bigdog72

    StockRoom “V” Drum Sander

    Does anyone have any experience with shop built drum sanders such as the StockRoom “V” Drum Sander ? Here is a link- http://www.stockroomsupply.com/V_Drum_Sander.php Looks simple and affordable!
  4. timf67

    Looking for a Drum Sander

    Hello everyone, I am looking for a good deal on a used drum sander - not a floor sander, but a drum sander for panels. Does anyone know where I can find one? Tim
  5. CrealBilly

    Never ran a floor sander before

    Got any Tips Trick ... There is just something about running a big machine chewing up wood is'nt there? Thanks
  6. MrAudio815

    Lathe Drum Sander? Can it be done? & Jigs

    Hey Everyone,:gar-Bi Just wanted to get your thoughts and ideas. :notworthy: I was thinking of using my lathe as a Drum/Thickness Sander for flat work,:widea: as it does have a motor and spins! Then I would make a bed to attach to the lathe bed and then add DC to the top? What do you think...
  7. adowden

    Grizzly Combo Sander G1183 - $300 Craigslist

    This is the same person from Angier that I bought the Lexan from: http://raleigh.craigslist.org/tls/1091223707.html He also has a bunch of other stuff for sale. I did a search for Angier and matched up the phone # to other stuff he is selling. He is selling 4", 5", 6" casters, a Roll-A-Way...
  8. S

    Osc Spindle Sander Opinions

    Considering getting this HF (currently on sale). Vs. The Triton at Woodcrafters. About $40 plus diff. but look exactly the same sans paint. Any one have experience with either one of these? Thanks Matt
  9. Larry Rose

    Sander R.I.P.

    My PC 5" RO sander is on its last legs and will probably not finish out my current project. This is the second one I've had and I'm a little disapointed in the life of them. I was wondering what every one else likes because I've got to replace it quickly. Any thoughts?
  10. mkepke

    Hitachi 10" compound miter saw plus sander: $99 today only

    From another site, Amazon has a 10" Hitachi CMS on sale for $99 with a bonus deal for a free-via-mail-in-rebate Hitachi ROS. http://www.amazon.com/gp/goldbox/ref=cs_top_nav_gb27/104-8648929-8844709 Rebate...
  11. PChristy

    Spindle sander kits

    Someone posted that they found a good deal on a drill press sanding spindle kit - It was awhile back - does anyone know who this was or where they got it? Thanks in advance
  12. WoodWrangler

    CL: Jet Spindle Sander

    http://charlotte.craigslist.org/tls/1015582075.html Jet JBOS-5 benchtop spindle sander--used once!!! - $200 (Harrisburg) Reply to: sale-1015582075@craigslist.org [?] Date: 2009-01-31, 4:17PM EST JET 708404 JBOS-5 5-1/2 Inch 1/2 Horsepower Benchtop Oscillating Spindle Sander with Spindle...
  13. Sealeveler

    Sander

    Some people don't need to sand their wood after cutting with their scrollsaw but I am not one of them.This may be old to some but I made a sander for my Dremel out of a cotter pin with sandpaper wrapped around it.I cut the paper as wide as the thickness of whatever I am sanding and I put the...
  14. MrAudio815

    Step Stool -Used Sander from Splint Eastwoods

    Hey Everyone, I made a step stool for my wife... She wanted a small step stool to get in and out of bed easier and for a short foot rest. I used Splint Eastwood's Ryobi ROS to sand it up. :icon_thum Worked Great, A Sincere Thank you to him. :notworthy: Well it's not the best, I used my Lock...
  15. Travis Porter

    Troubleshooting a belt sander

    I was using the belt sander Sunday and screwed up. I didn't realize it, but I was trying to sand 1/4" off of a board in a single pass with the platen in the thing. The belt got hot and it self destructed. The platen had a tear in it, but seemed ok, so I put it back in and a sanding we went...
  16. flatheadfisher

    New Sander Gloat

    I converted some fishing rods I don't use anymore into a sander today with the help of Craig's List. My domestic unit is already complaining about the kitchen being torn apart and I don't think she will wait long enough for me to use card scrapers to finish the counter top I am working on. I...
  17. flatheadfisher

    Belt Sander Question

    I need to take about 3/16" off the surface of hard maple, edge grain panel that is 3' x 25". (I screwed up :BangHead:). I have the top surface smooth and the bottom flat. My arms and back are too sore to do any more with the hand plane any time soon :sad11:. I have a three day weekend and...
  18. Glennbear

    sander speed control

    I have a Hitachi combo belt/disc benchtop sander which I am highly pleased with especially since I got it at a close out price :gar-Bi Being one to never let a bargain slip by I have also acquired some used similar machines of lesser brands. There are times when I am sanding smaller pieces that...
  19. M

    $30 for New Belt Sander

    Well -- after cashing in, that is.... Here's a picture of the newest toyl :tool:in my shop, a Porter-Cable 3" x 21" 352VS Belt Sander that I picked up a Lowe's today. It was cheaper at Lowe's than on Amazon.com at $169 and I got it for lots less, thanks to a nice Gift Card that I got back...
  20. Porter-Cable 3'' x 21'' VS Belt Sander

    Porter-Cable 3'' x 21'' VS Belt Sander

    $169 + tax less $150 Gift Card = $30.42 Toyl!

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top