running

  1. Mark Gottesman

    Finally got my Drill Press refurbed and running

    After quite a while this drill press that was made by my father (man in my OWWM avatar) during his college years (1940's) is back up in running. Still needs to have the belt/pulleys sorted. Without rebuilding the chuck the runout was 0.008", good enough for my wooddorking projects. The...
  2. BKind2Anmls

    Shaper Up and Running

    My friend bought a 3-phase shaper from Sully and we got it hooked up yesterday. On Sully's recommendation we hooked up a VFD and it's running great on single-phase power. A big thanks to Sully whom we called at least ten times during the installation. :icon_thum He was very helpful and patient...
  3. MarkE

    Running out of Birch Plywood

    Well folks, I am going to have to stop taking orders for the birch plywood. I am compiling a list of all the orders left for local pickup and for pick up at the picnic and we are very close to done. Here is what I have so far. If I left anyone out, I apologize. Please post here so I can make...
    • MarkE
    • Thread
    • birch plywood running
    • Replies: 9
    • Forum: Wood
  4. kooshball

    Code for running electrical in an unfinished attic?

    Hopefully someone out there can let me know the right way to do this so that it is safe and to code. I will soon be installing 4 recessed fixtures in my bedroom (one in each corner, 3' from each wall) and will need to run the electrical from my existing switch box. The bedroom is on the 2nd...
  5. MrAudio815

    The Utah Shop, Now Up and Running

    Hey Everyone, :icon_thum I finally did it. I got my shop from Goldsboro, NC to Utah and it is Now all set up. :banana: By all means not perfect, but Man OH Man does it feel much, much better/cleaner. I'm sure I will find faults in it and my third shop will be even better? :gar-La...
  6. Douglas Robinson

    Running for the BoD

    Mods and Admins: As I mentioned during our group teleconference, you along with the BoD represent some of the most engaged individuals with regard to thealth and welfare of NCWW. I am grateful for your passion and support of our organization. I hope that you took my statement that future BoD...
  7. Trent Mason

    Shop is up and running

    Up until yesterday, I haven't had time to mess with the shop, but when I found out Andy (Carved Tones) was coming over, I figured I better get that place looking like a shop, rather than a room full of tools. :gar-La; Well, because of the move, employment situation, etc, money is pretty tight...
  8. A

    New/old air cleaner up and running

    I have had an air cleaner on my "to do" list for a long time. I was originally going to build one, but recently purchased a new/old air cleaner from a member here (Brian Jessup) for a really good price. Jeremy provided PE service to get it to me at the picnic. I did some testing and work on...
  9. cubicdissection

    Dustroyer table saw dust guard - now p and running! NCWW discount

    Well, it took six weeks from the time I had the idea, but the website is up and we're ready to get going. I don't have as many model templates as I would like, but I figure we can add them as we go. There's a ton of saws up there that I need a pattern for, so if you want a free one just click...
  10. Woodchuck

    Chief Running Scared

    Not quite sure what this guys afraid of, but he sorta has that "deer in the headlight" look. Comments and suggestion always welcome. Thanks for looking. Chuck
  11. NCTurner

    Wooooohooooo!!! Lathe is up and running!!

    OK so about a month back I purchased an old Total Shop "Lathe" off ebay. It was delivered from FL about 1.5 weeks later...because of the set-up it was unusable(bent legs and loose busted wheels.) Well Mon I built a new bench for it, s*#t new problem no mounting holes to bolt it on the new bench...
  12. mshel

    Finally got the beast running

    Thanks to the help of C Powell, I finally got my Saylor Beall compressor up and running. I purchased this off Craigs list sometime last fall, sans a motor for $125.00 ( 5 hp 2 stage / 60 gal horizontal tank model) This is a stock photo which looks very much like mine. I had to purchase...
  13. Trent Mason

    Got the Grizz up & running

    Hello everyone! Some of you may recall my thread a few days ago where I gloated about getting my Grizzly 14" BS. Well, it took me about 3 hours and luckily I had some assistance from a coworker, but it is ready to go! :icon_thum I put it together normally at first, cut it on, ran great, made...
  14. The WoodButcher

    Running Lights

    :D Hi All, I do the sawmill thing, part-time and that part of the time is at night alot of the time. So I mounted me some running lights that work great. They do make it nice when I need to measure for a special cuts. 8)
  15. NZAPP1

    Is the site running slow?

    Is the site running slow and acting weird for anyone else or is it me? :eusa_thin
  16. Sharp Blade

    My router is running circles around me.

    Okay, I have the need to make a 6 3/4in. circle to set a dog bowl down into. I have no circle jig to cut the whole properly. Does anyone have any suggestion? I have tried, in vain, to make a jig, but I can't figure it out for a circle that small. HELP! :BangHead:

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top