routing

Routing through 8/4 wood.

I'm getting ready to work on a new project and I'll be doing something that I've never done before and need some advice. I'm going to be routing wavy lines on some different species of wood and then glueing them together to form a single piece of wood. I found this image as an example of what...
- NCGrimbo
- Thread
- Nov 10, 2011
- 8 or 4 8/4 routing wood
- Replies: 6
- Forum: General Woodworking
K
Routing against the grain

I have read several threads here about routing against the grain, but I don't see any solutions for my situation. I am having to fix some new legs for a pedestal and I am using one of the originals as a template. I have new legs cut to shape as close as possible and I can flush trim on the...
- kclark
- Thread
- Nov 2, 2011
- grain routing
- Replies: 8
- Forum: General Woodworking
S
CNC routing in the Charlotte/Pineville area?

Hi all. Looking for reasonably priced CNC routing in the Charlotte/Pineville area. Hoping to begin a project building a new set of speakers, and am in need of someone to perform the cutouts for the internal bracing, as well as the main baffle (which would have some recesses cut as well to...
- Supe
- Thread
- Aug 23, 2011
- area charlotte charlotte or pineville cnc routing speakers
- Replies: 6
- Forum: Where Can I Find, Buy or Sell?
IMG_01365
- eyekode
- Media item
- May 11, 2011
- dog holes routing square
- Comments: 0
- Category: Shop Photos
IMG_01343
- eyekode
- Media item
- May 11, 2011
- dog holes routing square
- Comments: 0
- Category: Shop Photos
IMG_01322
- eyekode
- Media item
- May 11, 2011
- dog holes routing square
- Comments: 0
- Category: Shop Photos
IMG_01313
- eyekode
- Media item
- May 11, 2011
- dog holes routing square
- Comments: 0
- Category: Shop Photos
IMG_01304
- eyekode
- Media item
- May 11, 2011
- dog holes routing square
- Comments: 0
- Category: Shop Photos
IMG_01282
- eyekode
- Media item
- May 11, 2011
- dog holes routing square
- Comments: 0
- Category: Shop Photos
IMG_01271
- eyekode
- Media item
- May 11, 2011
- dog holes routing square
- Comments: 0
- Category: Shop Photos
IMG_01265
- eyekode
- Media item
- May 11, 2011
- dog holes routing square
- Comments: 0
- Category: Shop Photos
Routing Gloat

I picked up a Triton 3 1/4 HP from Woodcraft a couple of weeks ago and got a great deal on the Kreg table at the Charlotte show. I need to get a split for the hose so I can also connect the under table dust port on the router.
- manfre
- Thread
- Apr 3, 2011
- gloat routing
- Replies: 23
- Forum: Power Tools and Their Use
Question - Routing inside corners

Routing inside corners with a round-over bit creates a radius at the corner. I have been whipping out the chisel and sand paper to make it square - is there a better way? a picture is worth 1000 words Thanks
- CrealBilly
- Thread
- Nov 16, 2009
- corners inside question routing
- Replies: 21
- Forum: General Woodworking
routing help

greetings all- I need a little help with some light edge routing as I have no router and no router table. Basically I'm adding a tapered edge to both sides of some 36" long poplar 1x2's. Is there anyone out there that might be able to do it for me for nominal fee in Raleigh NC area? :help...
- delco
- Thread
- Mar 12, 2009
- routing
- Replies: 6
- Forum: Where Can I Find, Buy or Sell?
Z
CNC Routing

Does anyone know where I can have large CNC components cut? We are building a 9' tall serpentine wall approx. 50' cord length. I'm thinking .75" plywood or MDF plates doubled up for top and bottom with stud frame. I live in Matthews NC.
- ZomaCom
- Thread
- Nov 25, 2008
- cnc routing
- Replies: 6
- Forum: Request For Custom Projects
newbie routing question

I have made some basic cabinet door frames. I now need to route profiles on the inside and outside edges. Since I have end grain showing, I need to know the best sequence for routing the outside edges to minimize tear out. Based on the pic, should I route north/south first and then do the east...
- ACobra289
- Thread
- Sep 2, 2008
- newbie question routing
- Replies: 10
- Forum: General Woodworking
Routing techniques?

I just fired up my router for the first time Sunday night after cleaning up all my scrap from the reindeer. I decided to just play around to get an idea of how this thing (Ryobi router mounted in the table it comes with) works. Well I made a few passes on the 1/2 inch pine scrap and it seemed...
- Will Goodwin
- Thread
- Feb 26, 2008
- routing techniques
- Replies: 18
- Forum: Power Tools and Their Use
how to avoid tear out when routing?

hi, almost everytime i use my router i use a template and a pattern bit... and in an attempt to aviod tear out i usually only cut about 2-3mms deep at a time and move the router pretty slowly, just fast enough so there is no burning, but yet i still get frequent tear out... i have pretty decent...
- jonnyfontaine
- Thread
- Nov 8, 2007
- avoid routing tear
- Replies: 15
- Forum: Power Tools and Their Use
B
Routing Stone?

I'm planning a project to install granite tile in my kitchen. The problem I'm having is how to come up with an attractive solution for the edge of the tiles that will overhang the cabinets. I've come across an edging technique called bullnosing which is basically the equivelant of rounding the...
- Boilermaker
- Thread
- Sep 2, 2007
- routing stone
- Replies: 4
- Forum: General Woodworking
R
Anybody need a routing system

Check it out on Charlotte Craigslist.He's wanting $200.:eusa_thin
- Robert Arrowood
- Thread
- Jun 30, 2007
- routing system
- Replies: 0
- Forum: Found for Sale/Hot Deals