rough

  1. Top and Bottom plates glued and rough shaped

    Top and Bottom plates glued and rough shaped

    • MikeH
    • Media item
    • and bottom glued plates rough shaped top
    • Comments: 0
    • Album: Mandolin Build
  2. M

    Rough Birdhouses

    The girls and I pulled together some bird houses for their Nana's birthday and for their Mom this weekend. :new_birth After reading a few websites, it sounded like birds perfer rough lumber and colors that do not attract attention. So, I had a pallet out back (from an incomplete...
  3. pviser

    Rough Cut! Hooray!!

    Tommy Mac and his show, Rough Cut, were back on UNC-TV at 3 PM today. Which one of my NCWW colleagues do I thank for this? Back when UNC stopped airing his shows, my repeated complaining through e-mails and letters was apparently ignored. I gave up my efforts months ago. Anyway, thanks to...
  4. flyrod444

    Maple burl rough out

    I've been looking at the burls on a large red maple tree for years and it was cut down last year when the property was developed for commercial use. I stopped and asked about it before they got around to cutting it and was told that it was already spoken for and was to be sawed into lumber. It...
  5. WoodRose

    A "rough" question for the masses...

    I recently purchased a 12 inch disc sander (subdued tool gloat:eusa_danc) and while shopping for replacement discs I realized I had a question… should I keep using the very difficult to remove stick-on adhesive backed disc or is it advantageous to switch to hook and loop discs? I imagine...
  6. A

    Rough Lumber help

    If I am buying rough lumber and need finish thickness to be 3/4" and 1.5" how think should it be in a rough state? I am thinking generally.
  7. Gone2dMtns

    Current value for rough cut WO

    Howdy guys! It's been while since I've logged on. I was wondering what the going rate per BF is for 8/4 rough sawn white oak. I tried to Google up the info and the prices are all over the place. Since WO is a fairly common wood here in central NC, I thought one of you might have an idea of the...
  8. CrealBilly

    From rough cut to spice rack in under an hour

    I made and finished this spice rack today. Took less than 1 hour from rough cut lumber to hanging on the wall. You may not be able to tell but the shelves have a 1/4 x 3/8" lip in the front, so the bottles don't fall out. If you can't tell that means I did a good glue job. I evoked some of...
  9. B

    Rough Cut Walnut $1 / bf

    If I wasn't heading out of town first thing tomorrow morning, I might have a different take on this... Maybe if someone gets most or all of this I can get some of it. I think this is from the same guy that sold the mahogany and the zebrawood. http://raleigh.craigslist.org/mat/2250874684.html
  10. kernnal

    CL Rough Sawn Beams

    http://eastnc.craigslist.org/mat/2243003298.html Rough Sawn Beams - $120 (Rocky Mount) Date: 2011-03-02, 12:37PM EST Reply to: sale-7rx3w-2243003298@craigslist.org [Errors when replying to ads?] One walnut beam: 4" x7" x 12' One cherry beam: 4" x 10" x 12' Both 25 years old Location...
  11. Mark Gottesman

    CL Air Dried Rough Lumber in Lawsonville, NC

    Not mine , but if anyone form Winston is heading up, give me a shout. I need some banjo material. http://winstonsalem.craigslist.org/for/2234818547.html Rough Cut Lumber For Sale (Lawsonville, NC) Date: 2011-02-25, 6:53PM EST Reply to: see below ROUGH CUT, AIR DRYED LUMBER FOR SALE...
  12. Rhythm House Drums

    How to mill rough lumber

    So I've heard a few different approaches... I'm not talking about skip planing or milling a log, I'm talking about when I bring in rough cut lumber to the shop... what to do to square it up... I've heard to let it sit in the shop for a few days before working it... What do you do if your shop...
  13. M

    source for rough cut

    i'm building a barn for my step son and will be needing 220 1x12x10 and 220 1x3x10 also some misc 1x6 and 1x8 16 long leaf southern yellow, dose anyone want to give me a price per bdft and estimate on how long it would take to fill the order? please keep it within an hour or two of moore county.
  14. kooshball

    Looking for 4/4 or 5/4 rough poplar lumber near Apex

    Need about 40 bdft of 4/4 or 5/4 poplar for drawer sides and dresser carcass bottom preferably near Apex; any ideas? Thanks
  15. E

    Where can I find rough locust lumber?

    Looking for 8/4, 5/4 and 4/4 rough locust. I am hoping to use over the winter to make several Adirondack chairs and a couple of garden benches. From what I read, it should last very well outdoors. Lumber sources close to Richmond VA would be preferred. I saw one posting on craigs list near...
  16. PeteM

    Rough Cut Show Trailer

    http://www.wgbh.org/programs/programDetail.cfm?programid=1123
  17. kooshball

    any rough framers or remodeling contractors here??

    I am looking to expand my bonus room within the existing footprint of the garage below it (read: no foundation work) and am looking for the most cost effective way to get it done. I am capable and willing to do all the interior work as well as most of the exterior work but I am going to need...
  18. M

    WTB Rough Cut 6/4 Oak

    Hi guys, I'm wanting to buy some rough cut oak to re-deck my trailer. Obviously doesn't need to be of furniture grade since it's only for a trailer. I'll need 8" or 12" wide boards (or something I can make 8") as the deck is 96" wide. I'll either need: Twelve 18' and eight 10' boards OR...
    • mxracer
    • Thread
    • 6 or 4 cut oak rough wtb
    • Replies: 9
    • Forum: Wood
  19. benwise

    Where to find rough cut posts/beams

    I'm replacing the dinky metal porch posts on my house, and I want to use rough cut posts. So I'm looking for some big (maybe 10x10, or even 12x12) posts, rough cut. I'm guessing cedar or cypress, though I'm open to whatever. So what's your advice--what;s the best wood to use, and where could...
    • benwise
    • Thread
    • cut find posts or beams rough
    • Replies: 2
    • Forum: Wood
  20. DaveO

    Turning rough burl questions

    I just recently got some Cherry burl thanks to WoodArtz in the latest deal. Now I am torn on how to turn them. I have turned burl before but it has always been in a nice square block form. These are not - Most are half logs with the burl wood on the outside. Normally when I turn a half log...
    • DaveO
    • Thread
    • burl questions rough turning
    • Replies: 15
    • Forum: Woodturning

Premier Sponsors

Contact for your financial processing needs!

Our Sponsors

LATEST FOR SALE LISTINGS

Top