press

  1. johnpipe108

    A drill press stand, pine and melamine

    I finally got a chance to go to the "BORG" with transport; I needed a new soldering iron, and looked over the wood and saw what I needed to make a stand for my DP, which has sat forlornly on top of (variously) my sewing machine table or my writing desk! I used an angle gauge to take the...
  2. Repaired Drilled Press

    Repaired Drilled Press

    Repaired Drilled Press Column
    • Douglas Robinson
    • Media item
    • drilled press repaired
    • Comments: 0
    • Category: Member Galleries
  3. Douglas Robinson

    Repaired my drill press!

    Awhile ago the rack on my drill press broke in two. I ordered a new one but never installed it as it usually takes 2 people to disassemble it. Today I did myself! Laid it down and went to work. Figuring out that I had to take the lowering mechanism off, insert the rack and then slide the...
  4. S

    older benchtop Cman drill press

    .
  5. cskipper

    NCWW mugs from Cafe Press

    I realize that we are looking to move away from using Cafe Press, but is any of our stuff, specifically the large coffee mugs still available?
  6. Joe Scharle

    Veneer vacuum press near me?

    Anyone near Raleigh have a press I could use/rent to reface a large drawer?
  7. W

    radial drill press owners?

    Does anybody in the Mooresville area, Lake Norman, Kannapolis ,Statesville have a radial drill press that could be setup to drill 1.5" holes in the end of 4 by 4 by 8' cypress post's. It is end grain :nah:and I'm trying to drill by hand drill and it is slow going to put it nicely. I've got 4 of...
  8. christopheralan

    Is a Pen Press worth having?

    Hey guys. Is buying or making a pen press worth the money or time to make? I have been using my vise so far, but I am thinking about getting or making one. What do you say guys? Are they worth it? thanks!
  9. Larry Rose

    Drill press

    I'm sort of in the market for a new drill press (if SWMBO doesn't find out) and am unsure of what to get. I want a full size floor model. Any ideas???
  10. eyekode

    Drill press chuck key and spanner wrench?

    Any good local sources for a drill press chuck key and a spanner wrench to match the collar above the chuck? I think I need a "K3" chuck key. My old drill press key had this marking and worked fine on my new to me PM1150A. As for the spanner wrench I am not familiar with these but I need...
  11. eyekode

    Replace drill press return spring (and depth stop)?

    Through an act of stupidity I broke the return spring on my newly acquired PM 1150A. If you must know it did not come with the depth stop and the first time I touched the thing I lowered the spindle (much) too far. Anyway I opened it up today to take a look. The tab that goes through the rod...
  12. ScottM

    Cafe Press

    I think it is time we find a new supplier of NCWW Calendars and other merchandise. As I had previously indicated I was going to purchase NCWW hats for members who help out at the WW Show and also for picnic door prizes. Well they retail the hats for $14.95 but our cost is $9.50. A bit high...
  13. S

    Ridgid drill press $179 at HD

    Was in HD in Gastonia today and I always walk through the tools in a HD incase somethings on sale. I noticed the drill press a week or so ago marked down to about $254, now its $179. I took the one they had home.
  14. manfre

    Drill press drum sander recommendations

    I'm looking to buy drum sanders for my drill press and I would appreciate any recommendations for a brand and suggestions on which diameters I should initially buy. I have a specific project that will need the smallest diameter possible, but I'm not sure which of the larger diameters would be...
  15. Leviblue

    Ridgid Stationary Drill Press - Opinions

    I went to the HD today and purchased a stationary drill press that was on clearance. The clearance price was $299 but I had a photo from another store where the price was $149.50. I spoke with the Asst. Mgr and they matched that price. HD has clearanced several of the Ridgid stationary tools...
  16. roweathers

    WTB Delta or PM drill press

    Looking at the following drill presses: Delta 18-900L and the PM 2800. Would appreciate any advice on your experiences, thoughts... I would be interested in best place for good deals either new or slightly used. Thanks, Ron
  17. Jet JDP-17DX 17" drill press

    Jet JDP-17DX 17" drill press

    17" drill press sitting on a mobile base
    • manfre
    • Media item
    • drill jdp-17dx jet manfre press
    • Comments: 0
    • Album: Misc Shop Pictures
  18. Unloading_Jet3

    Unloading_Jet3

    • cpw
    • Media item
    • band drill jet move powermatic press saw
    • Comments: 0
    • Category: Member Galleries
  19. Unloading_Jet2

    Unloading_Jet2

    • cpw
    • Media item
    • band drill jet move powermatic press saw
    • Comments: 0
    • Category: Member Galleries
  20. Part

    Part

    • cpw
    • Media item
    • band drill jet move powermatic press saw
    • Comments: 0
    • Category: Member Galleries

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top