plate

  1. Carved Plate

    Carved Plate

    Preston Williams bugle@nc.rr.com Apex, NC Turned and carved maple plate
    • Bugle
    • Media item
    • carving maple plate turning
    • Comments: 0
    • Category: Turning
  2. My First Offical Non-Spindle Turning-A Magnolia Plate

    My First Offical Non-Spindle Turning-A Magnolia Plate

    Wood: Southern Magnolia Finish: Miniwax Finishing Wax Diameter: 9 inches
    • wmslayton
    • Media item
    • beautiful grain magnolia plate spalting turning wood
    • Comments: 0
    • Album: Southern Magnolia Woodturnings
  3. Colli-Beck zero clearance insert plate for SawStop

    Colli-Beck zero clearance insert plate for SawStop

    • merrill77
    • Media item
    • clearance plate sawstop zero
    • Comments: 0
    • Album: SawStop
  4. Colli-Beck zero clearance insert plate for SawStop

    Colli-Beck zero clearance insert plate for SawStop

    • merrill77
    • Media item
    • clearance plate sawstop zero
    • Comments: 0
    • Album: SawStop
  5. Colli-Beck zero clearance insert plate for SawStop

    Colli-Beck zero clearance insert plate for SawStop

    • merrill77
    • Media item
    • clearance plate sawstop zero
    • Comments: 0
    • Album: SawStop
  6. Colli-Beck zero clearance insert plate for SawStop

    Colli-Beck zero clearance insert plate for SawStop

    • merrill77
    • Media item
    • clearance plate sawstop zero
    • Comments: 0
    • Album: SawStop
  7. kooshball

    Lapping plate for Arkansas stones?

    I just picked up pair of nice thick (1") Arkansas stones (soft and black surgical) from Halls Pro Edge that need a flattening (mostly on the soft Arkansas). Is this a job for a diamond lapping plate or can I get by with a flat surface and some sandpaper? I am not sure how rough this process...
  8. F

    Brass plate around the Hickory area

    I am looking for a source for 1/8" brass plate in western NC; google has not helped me :evil: I'm assuming 1/8" is what i need, it would be for small parts on various jigs and whatnot.
  9. J

    DW 682 Plate (biscutt) Joiner -$40

    Currently on RDU craigslist. listed as "Retiring, Moving, Must Sell All Tools -$20 Carboro. See add for details.
  10. Desk Name Plate

    Desk Name Plate

    Walnut Name Plate with Card Holder
    • Sealeveler
    • Media item
    • name plate walnut
    • Comments: 0
    • Category: Member Galleries
  11. Walnut "plate"

    Walnut "plate"

    Designed by Steve Goode. 7.75 x 7.75 x .75
    • cskipper
    • Media item
    • baskets cekipper plate
    • Comments: 0
    • Album: Baskets & bowls
  12. ebarr

    Small plate rack project

    LOML wanted too store our plates in the cabinets vertical instead of horizontally. So I came up with this. My math was off just slightly on the last large plate before the smaller plates start. It looks farther behind the center piece it in the photo than it really is. the dowel is actually...
  13. mkepke

    Where to buy aluminum plate in SE Wake ?

    Picked up a RAS from Sully (Jay), but it's missing one of the lower leaf guards. I think I should be able to fabricate a replacement from aluminum since I can copy the one I have. Does anyone have a source for cheap 1/8"-3/16" thick aluminum plate in SE Wake county ? Somebody with a pile of...
  14. N

    Homebuilt case for surface plate?

    Anyone have ideas on building a carrying/storage case for a granite surface plate? Woodcraft had them on sale so I got one. We'll see if it helps with sharpening. The problem is that it's big (2x9x12) and HEAVY! I haven't weighed it but the Woodcraft guy seemed to think it was 20 lbs or so...
  15. Plate Rack

    Plate Rack

    • red
    • Media item
    • cherry plate rack
    • Comments: 0
    • Category: Member Galleries
  16. T

    How to cut Diamond Plate

    What do you use to cut Aluminum Diamond Plate (Tread Plate)? I saw on TV where they used a circular saw. Do you need a special metal cutting blade?
  17. Tar Heel

    Thanks to those that stepped up to the plate

    As you all know, the 4th quarter donation drive ended on October 31. Ten days before the drive ended, we had a total of $625 in donations. On October 31, we had $1,620. That, to say the least, was a fantastic finish and all that donated deserve a big round of applause. Many comments were made...
  18. Mark Stewart

    Looking for a small face plate

    Hi guys and gals, I am looking for a small (3") 1x8tpi face plate for my HF lathe. I have a 6" and now im looking for a smaller one if anyone knows where Please let me know. Thanks Mark
  19. B

    Machinist's plate

    Not mine - just ordered the 18X24 granite plate from Enco for ~$37. http://greensboro.craigslist.org/tls/1424561474.html
  20. S

    Granite Plate

    I'm looking for a tool grade granite plate like this one from Grizzly http://www.grizzly.com/products/g9654 I was wondering if there is a local vendor in Raleigh/Cary (within 50 miles driving distance) who can provide a similar tool grade granite plate. Don't wanna spend $74 on shipping on a...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top