planing

  1. G

    Someone in Greensboro Area Who Can Joint/Plane/Square-Up a 2-Inch Piece of White Oak

    2 inches thick by about 6 inches by six feet long. New it planed to 1.5"
  2. jarrett

    Clamping techniques for hand planing?

    I am starting to learn how to use my rabbet plane (a copy of the Record 778) and I am having trouble figuring out how to clamp my wood down so that I can use it. My workbench is from Harbor Freight with a single tail vise. http://www.harborfreight.com/60-inch-solid-oak-workbench-93454.html...
  3. P

    My planer broke, where can I get some planing done?

    In the middle of planing some walnut my planer broke. I need to find someone who offers planing service to finish it for me. Anyone know of a business to help, near Raleigh?
  4. leftoflefty

    Planing question

    So I picked up some cypress wood at The Woodworking Source yesterday, and it pretty darn flat. My question is, do I HAVE to joint one side before i send it through the planer or can i just plane both sides? I know its better to have a "for certain" dead flat surface for the planer, but this...
  5. Phillip

    Japanese Hand Planing contest

    The Piedmont Japanese Carpentry Club will be hosting a planing contest for users of Japanese planes. The contest is Saturday December 12th in Greensboro at J Speetjens shop. Email me for more information. www.gsodogu.com is the website, gsodogu@gmail.com is the email address. Phil Fuentes
  6. Snipesled

    Snipesled

    • Bas
    • Media item
    • jig planing snipe
    • Comments: 0
    • Album: Workshop & Jigs
  7. Snipesled

    Snipesled

    • Bas
    • Media item
    • jig planing snipe
    • Comments: 0
    • Album: Workshop & Jigs
  8. Snipesled

    Snipesled

    • Bas
    • Media item
    • jig planing snipe
    • Comments: 0
    • Album: Workshop & Jigs
  9. Snipesled

    Snipesled

    • Bas
    • Media item
    • jig planing snipe
    • Comments: 0
    • Album: Workshop & Jigs
  10. D

    planing bench

    I am trying to come up with a saw horse, of sorts, for use with a Japanese inspired planing bench, which is in reality a 10 x 10. I have tried several different saw horses and every time the pressure used in planing causes the saw horses to tumble. I thought about extending the legs more...
  11. Y

    Planing figured woods?? especially Koa wood

    Hi Folks, I'm having tear out issues with the Koa wood I've been working with. I've sharpened blades on the jointer and the planer. I've tried using a 50/50 spray mixture of fabric softener and water on the wood prior to planing. No matter what I've tried I still get tear out on this highly...
  12. R

    planing a wide board?

    Anyone know of a shop where I might get a large slab of pecan planed? It's 21 1/4" wide x 2 3/4" thick x 77" long. It also needs to be cut to length. My planer is only 15" and my saws won't handle the thickness. Looking for a shop in the Wake, Franklin, Nash, Wilson Co. area.
  13. flatheadfisher

    Planing Colorful Cutting Boards

    I used the hand plane some panels I made to make some "patchwork quilt" cutting boards out of. I really enjoy making long thin curls come off of the plane. The walnut is my favorite but these panels had seven other species of wood in them. One piece of hard maple was really a pain because of...
  14. TN Woodie

    planing first side

    I have watched the process of flattening and squaring rough lumber using a jointer by first flattening one side, then jointing one side. Moving to the planer, second side flat and parallel. Moving to the table saw second edge straight and parallel. Great, but I don't have a jointer for the...
  15. Arguseyed

    Planing old PT boards?

    I guess this is sort of woodworking. Would there be any problem in removing the pressure treated decking boards that make up my front steps and run them through my planer (Dewalt 733) ? There about 5 years old and have been pressure washed every year and re-sealed with Cabots, but they're...
  16. M

    Planing painted lumber

    I have a pine shelf that I pull out of our laundry room when we installed some cabinets for more organized storage. This is your standard pine shelving board painted (or more accurately primed) white. It is currentyly just standing in my wood-caddy. Since it is about 12"x1"x8', I wouldn't mind...
  17. R

    Planing rough sawn pine

    I'm in Raleigh and have a stack of 5/4 rough sawn pine 10'-12', varying widths (6"-13") I need to have planed to 4/4. Total of 66 boards. It is too much for my bench top planers (Ryobi and Dwalt) to deal with. Anyone in the area that knows of someone that would help with this? I can rip and...
  18. J

    Planing Question

    I have some old table tops.....that are finished. Is there any problem running them through the planer, or should they be striped before hand?

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top