parts

  1. K

    Seek: shop to fab wagon parts

    I'm looking for a shop or individual that can help fabricate parts for an antique wagon restoration.. Any leads would be most welcome. Mark in Kernersville NC
  2. U

    Seek: shop to fab wagon parts

    I have an antique wagon I am restoring and am looking for a shop or someone that could replicate parts that need to be replaced.. Any leads or help would be most welcome Mark in Kernersville yankneurop@aol.com
  3. Tarhead

    Cheap and Good Linear Bearings and Parts?

    Anybody have 4 linear bearings, pillow block mounts, and 2 matching ~18" X ~1/2-3/4" diameter rails, etc laying around? Or know a good cheap source? Thanks!
  4. W

    Stanley Plane Replacement Parts

    While cleaning up and starting to tune-up three old hand planes, I somehow came up a screw short. It looks like I can order a a screw replacement kit from Highland Hardware. If I don't find this screw, which I am not very hopeful now...
  5. JRD

    Delta Parts

    Several weeks ago the tool rest on my Delta LA200, midi lathe broke and I'm having a devil of a time finding a replacement. Delta has discontinued the part, and I've yet to find one elsewhere online. Anyone with any ideas on where to get another, or where and at what cost another might be...
  6. H

    Hitachi C10FR Parts

    I recently burned up the motor on this little saw. When I learned a new motor would cost more than a new saw I completely dismantled the saw. If anyone needs any parts, let me know. Everything left goes to the scrap dealer 6/30.
  7. SgtSnafu

    Wanted: 6x48 Belt sander for parts...

    Hey everyone, I am looking for a non-working 6×48 belt sander for parts. I am mainly needing the belt assembly parts only, the rollers, the frame to hold the rollers and platen, basically this whole belt assembly. I do not need the motor, disk sander parts, or machine housing. I am...
  8. Joe Scharle

    Milwaukee router parts???

    I need a pair of brushes and 1 holder, but will buy a pair anyway. However, the Milwaukee site is a marvel of circular logic. I can find the part numbers, but the site wont let me buy any. Instead it sends me to a bunch of retailers, who....wait got it....won't sell me parts, but....wait for...
  9. L

    GSO CL: conveyor parts. Outfeed supports?

    Not mine, someone sellin 8-12 foot conveyor sections in NW Greensboro http://greensboro.craigslist.org/mat/1691842482.html Might be useful for a shop, just not enough room in mine.
  10. erasmussen

    New lathe parts

    With the HF lathe raised up I needed a new banjo. and in order to use the old Tool rest's for the HF I needed an extension, I could have made the banjo taller where it holds the tool rest, but then I wouldnt be able to use the taller tool rest's the banjo the extension
  11. IMG00016-20100314-1740

    IMG00016-20100314-1740

    • jmichel917
    • Media item
    • for more parts stand the
    • Comments: 0
    • Album: Mitresaw Stand
  12. CarvedTones

    small parts sled

    This is for cutting small to tiny parts on the tablesaw. The TS seems somewhat like overkill for some things this small, but it is much easier to get very accurate repeatedly and cut small adjustments. Anyway, here it is with a little chunk of ebony about to cut a nut for a medieval fiddle...
  13. TheLazyC

    I created spare parts tonight

    So I got inspired to go out to the shop tonight to try pen turning day two. So I thought I would try one of my good pen kits and nice wood blanks, since the first one went so well, I cut the blank to the two lengths required and drill the first hole and messed it up, I don't have a drill press...
  14. sawduster

    GE appliance parts

    looks like I need a new thermal limiter for my dryer any ideas where I can get one of these locally ? .....Franklin Co, North Raleigh locally I mean :mrgreen:
  15. algustaf

    Does anyone have any Parks 12" planer parts?

    I know this is probably more of a OWWM ??? But, I would rather source something out locally first. I am in the process of restoring a Parks/Craftsman 12" planer and noticed that one of my parts should be replaced. Now I can probably get it to work as is, but if I am going through all the...
  16. Joe Scharle

    Thin Parts Ripping Jig

    Purpose: Rip splines/moldings to consistent thicknesses on table saw. If you make the jig to an even width, you'll be able to use your fence cursor for ease of setup. Begin by ripping a 48" piece of MDF to 1/16" oversize. i.e. 4 1/16", 5 1/16" etc. Bigger hands will benefit from a wider...
  17. ScottM

    Dust collection parts

    Not mine No connection http://raleigh.craigslist.org/tls/1275228387.html
  18. michaelgarner

    Veritas Twin-Screw Vice parts

    Hello friends, Well I am almost done with my bench. I installed the Twin-Screw Vice and everything was going awesome on the instillation. But when it was time to put the chain on I realized that I was missing a part for the chain, I am missing the "Full-Link" to be able to connect the chain. I...
  19. Woodchuck

    Parts Fit-Roscoe's Finished

    Well I got all the parts together and dressed him up. He's about 8" tall overall. Thanks for looking. Chuck
  20. Woodchuck

    Hope All These Parts Fit

    Here's Roscoe, a WIP. First time I've tried to carve separate parts and fit them together. As you can see, it allows you place the head in different positions. The bust will be mounted on a stand attached to a base. Now I have to decide what color outfit he has on. Will post when completed...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top