paring

  1. miter paring jig

    miter paring jig

    I made the guide to fit 3/4 stock with a centered 1/4 inch wide panel groove. The guide has a tongue that rides in the groove and can be clamped in vise to hold it securely for paring the miter. In this illustration the inner groove wall of the rail will not be mitered so the tenon shoulder is...
  2. miter paring jig

    miter paring jig

    Miter paring guide shown where it mates with the rail or stile to be mitered.
  3. miter paring jig

    miter paring jig

    Photos show a small paring guide for mitering the moulding on frame and panel door stiles and rails. I made the guide to fit 3/4 stock with a centered 1/4 inch wide panel groove. The guide has a tongue that rides in the groove and can be clamped in vise to hold it securely for paring the miter.
  4. miter paring jig

    miter paring jig

    Miter paring guide set up to pare the outer molding. Normally the unit would be gripped in a vise to hold it steady.
  5. German_Paring_Chisel_2_resized

    German_Paring_Chisel_2_resized

  6. German_Paring_Chisel_1_resized

    German_Paring_Chisel_1_resized

  7. LeftyTom

    Questions About Paring Knife Handle

    I have two paring knives (about 26 yrs old) that Carla really likes. One has the handle split, and I figure the other cannot be too far behind. I have already made a template, and have cut 3 handles of red oak (the only wood that was the correct thickness). 1) Does the collective NCWW...
  8. Larry Rose

    Paring Chisels

    Who makes good paring chisels? I've got a set of Robert Sorbys and they will not hold an edge at all. After a few paring cuts (no mallet) the edge actually curls over :BangHead:. They are next to useless. My old Marples bevel chisels were a lot cheaper and are far better. Any ideas?
  9. woodguy1975

    WG is Paring Down!!!!!!

    Check the classifieds... I'm pairing down the shop to put it in storage for the time being. I'll be unloading wood, a bench, and some misc other shop accessories.. I'm going to be moving very soon so pickup will need to be pretty quick on most items. Thanks, John

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top