ouch

  1. M

    Chisel Bite... Ouch

    Well, Saturday night, I was working on a small desk for my oldest daughter. Things were going pretty well. I was working on a side panel stile, squaring up the corner. Of course it was on the last stile. For various reasons, probably including a momentary laps of reason, the work piece moved any...
  2. Ken Massingale

    Ouch!!! First Tablesaw Incident

    Yep, I finally paid for not using a blade guard. :wmad: I was ripping Red Oak Monday afternoon with the fence set to 3 1/2" from the blade and blade set 1" high. I finished a rip and the narrow cutoff started hitting the blade, so I hit the Stop button to remove it from the left side of the...
  3. S

    ouch!

    .
  4. eyekode

    Ouch!!!

    I feel it is my civic duty to share my stoopidity in hopes that it helps someone else avoid my pain :). Two nights ago I suffered the worst WW accident I have had. I managed to plow my freshly sharpened 1/2" chisel into my hand! The short story is 5 stitches between my thumb and my first...
  5. Dusty Sawyer

    Easter Eggs?? Chicken says "ouch"

    Just in time for Easter, I started turning a few Eggs and other objects so that I could practice some new finishing techniques. Here are the Eggs: View image in gallery They were turned from Ash and then treated with Behlen Stain for the coloration and then Lime Wax to enhance the grain. Here...
  6. A

    Ouch!!!! Be Carefull out there!!!!

    I took the following report/confession of a very good friend and fellow woodworker from VA, off another forum. No pics- too gruesome!!! Power tools can be dangerous!! Oh, as of a few years ago, he is a full time, self employed, WW, so is now out of work for a few weeks! It could have been worse.
  7. J

    Ouch

    Well I debated on posting this one but thought I would share it with ya'll so you guys don't do the same thing I did. I was swinging 8' boards around in my shop - my ceilings are 9' tall and there are florescent lights up there - well you already know what happened a board edge caught one of...
  8. Littlejon

    MAJOR Tool Ouch!

    Well, a few weeks ago I broke out the 'ol circular saw to make a quick cut on something and the thing just didn't cut right. The guard didn't go all the way back and I couldn't figure out what was going on. I was in a hurry, so I made the cut as best I could and left it for another day. Well...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top