nova

  1. Rick M

    Nova chuck runout

    I bought a used Nova Midi and first run up there was visible runout so I checked it with a dial indicator. Runout on the outside of the jaws was ~0.040; but is tough to check. Then I chucked a piece of PVC (it was the best thing I could find) and runout was ~0.015. Considering the PVC may not...
  2. Truefire

    Nova G3 chuck jaws availability

    Any of you guys familiar with an online location that has good prices on the Nova G3 chuck jaws and possess good customer service? Chris
  3. M

    Someone was selling a Nova 16-? lathe

    Back a couple months ago someone had a Nova 16-44 (i think) lathe for sale here. Did it ever sell? If not please contact me. Thanks Dan
  4. sawduster

    nova G3 question

    My stupid rookie question of the month week day :embaresse Woodcraft is offering this http://www.woodcraft.com/Product/2080766/29195/Nova-G3-Chuck-and-Jaw-Promotional-Package.aspx It seems the caveat is " insert sold separately " . Are they referring to the part that actually screws onto the...
  5. PChristy

    Nova Midi Chuck

    100-0240Nova Midi Chuck 1"-8TPI $99.99$69.99 http://www.woodturnerscatalog.com/store/Chucks___Teknatool___Nova_Midi_Chuck___nova_midi?Args=
  6. efr

    Sale on nova 1624

    I just got back from Woodcraft where they told me that the Nova was going on sale in a few days - and they gave me the sale price today! Guess who has a new lathe! They also told me that there was to be a store wide sale during October. efr
    • efr
    • Thread
    • 1624 nova sale
    • Replies: 4
    • Forum: Woodturning
  7. V

    nova lathe problem

    Less than 1 yr old Nova XVR does not power up. Used it aabout a week ago and everything was fine but yesterday turned it on and nothing. Checked outlet and panel and they were fine. The toogle appears to be ok too ?? but thereis nothing in the display window. Any ideas from Nova owners? Thanks...
  8. S

    Nova 1624 - adding variable speed - Followup

    Nova 1624 – adding variable speed – followup. My original article had over 1500+ views between all the forums – so thought I’d do a quick followup. So far, all pro and no con. The motor/VFD combo performs well, and in many ways goes beyond my initial expectations. The...
  9. S

    Nova 1624 - adding variable speed

    Links to my article on Nova 1624 variable speed. http://www.sawmillcreek.org/showthread.php?t=134952 http://www.woodturnersresource.com/c...num=1268097435 Link to article on Remote Box for VFD. http://www.sawmillcreek.org/showthread.php?t=135179
  10. johnpipe108

    Nova chuck references/howtos/tutorials?

    I have recently returned to my English Northumbrian bagpipes project, about a year and a half after making the smallest drone: Today I went out to Woodcraft and purchased a Nova Precision Midi woodturning chuck, and I've never worked with this type chuck before. As may be seen in the photo...
  11. timf67

    New Delta Midi Lathe with Nova G3 and tools

    AT TOOLNUT! Follow us on Twitter for the most up to date specials! 877-TOOLNUT Buy a Delta Midi Lathe ---> Get a FREE set of turning tools and a Nova Chuck! Lathe & Bed Extension Here's the deal you've all been waiting for. Pickup a Delta VS Midi Lathe (46-460) and bed extension...
  12. E

    Looking for jointer/planer sharpening service in NOVA

    Looking for a good sharpening service in Richmond and or northern virginia. Woodcraft in Richmond want's $0.85/inch per planer/jointer blade, that's $38 for 3 15" blades, I can get a new freud blades for $42 + shipping. Woodcraft in Leesburg wants $1.20/inch for a set of 3, that's $18, not...
  13. H

    Headstock pulley removal - Nova 3000

    I have a Nova 3000 lathe and have already appreciated your assistance in remounting the pulley set on the motor. Now I find that i want to pull the headstock pulley set. Here's why. When I remove the drive belt and spin the headstock by hand there is a definite point at which th ere is a...
    • Henry W
    • Thread
    • 3000 headstock nova pulley removal
    • Replies: 6
    • Forum: Woodturning
  14. mountaintop

    New Nova DVR XP getting Fault Low Voltage

    Without starting a flame I would like to ask one question. Do others have the Fault LowVoltage warning on very light catches? Mine is only 4 days old and has the latest version board according to Tim 6.06xs14 which is not suppose to have these errors anymore. I can't turn a bowl without...
  15. S

    Nova DVR XP Lathe

    http://www.woodcraft.com/Product/2005485/22172/Nova-DVR-XP-Lathe.aspx Any good/bad opinions/experiences about this lathe? I have taken one wood turning class back in 2007 and have drooled over this lathe for almost a year. @ $2.2K it was too expensive for me but @$1.7K I may just get this one...
  16. PChristy

    Nova G3 on Amazon 114.95

    http://www.amazon.com/WOODLATHE-CHUCK-WOODWORM-SCREW-INSERT/dp/B000F3EUB2/ref=sr_1_4?ie=UTF8&s=hi&qid=1250042077&sr=8-4
  17. W

    nova chuck 99.00

    anyone useing this chuck,if so whats your opinion of it. http://www.woodcraft.com/family.aspx?FamilyID=5185 wayne
  18. Splinter

    NOVA DVR XP Lathe

    Does anyone on this forum own the NOVA DVR XP lathe?
  19. Ken Massingale

    PSI Cole Jaws On Nova G3 Chuck

    Anyone know if the PSI Cole Jaws will work on a Nova G3 chuck? Thanks ken
  20. LeftyTom

    Nova Comet Lathe in High Point

    $425 1/2 HP TEFC, GAP BED EXTENSION,STOCK AND 12" TOOL REST, 20" BED EXTENSION, STEEL STAND, 2 3/4" OAK TOP, SPINDLE STEADY http://greensboro.craigslist.org/tls/1185570088.html Not mine, no one I know

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top