Jesus Loves Me This I Know For The Bible Tells Me So
This unique design came from an older (Spring 2015 Issue 58) of @scrollsawwoodworking by @foxchapelpublishing
I photocopied the pattern and attached it to a leftover piece of 3/4 inch Oak laminated cabnit grade plywood with clear packing tape...
Hey Everyone! In this scroll saw project video, we make a cool guitar man design by Steve Good. It uses 1/4 inch material and this project would be great to make and give to music lovers! Music is the international language! Hope you all like the video!
#ArtisanPirate
Hand drum (djembe) custom built from walnut wood slats. Maple inset with seal engraved, and metallic banding with tack work around the bottom. Custom wave carving. Lathe and V-Chisel for shaping
Hand drum (djembe) custom built from walnut wood slats. Maple inset with seal engraved, and metallic banding with tack work around the bottom. Custom wave carving. Lathe and V-Chisel for shaping
Hand drum (djembe) custom built from walnut wood slats. Maple inset with seal engraved, and metallic banding with tack work around the bottom. Custom wave carving. Lathe and V-Chisel for shaping
Hand drum (djembe) custom built from walnut wood slats. Maple inset with seal engraved, and metallic banding with tack work around the bottom. Custom wave carving. Lathe and V-Chisel for shaping
My wife wanted a ukulele so I made one! It sounds better than I expected considering the very small body.
Poplar neck, sides and kerfing inside the body.
Walnut fretboard, bridge, nut and inlay in the headstock.
Southern yellow pine top and back.
Copper wire frets.
The apron is a...
My wife wanted a ukulele so I made one! It sounds better than I expected considering the very small body.
Poplar neck, sides and kerfing inside the body.
Walnut fretboard, bridge, nut and inlay in the headstock.
Southern yellow pine top and back.
Copper wire frets.
The apron is a...
My wife wanted a ukulele so I made one! It sounds better than I expected considering the very small body.
Poplar neck, sides and kerfing inside the body.
Walnut fretboard, bridge, nut and inlay in the headstock.
Southern yellow pine top and back.
Copper wire frets.
The apron is a...
My wife wanted a ukulele so I made one! It sounds better than I expected considering the very small body.
Poplar neck, sides and kerfing inside the body.
Walnut fretboard, bridge, nut and inlay in the headstock.
Southern yellow pine top and back.
Copper wire frets.
The apron is a...
My wife wanted a ukulele so I made one! It sounds better than I expected considering the very small body.
Poplar neck, sides and kerfing inside the body.
Walnut fretboard, bridge, nut and inlay in the headstock.
Southern yellow pine top and back.
Copper wire frets.
The apron is a...
OK, so it's not ALL maple. But it is for the most part. My son Matthew and I were looking for a new project, and for some reason wind chimes seemed like a cool idea. In retrospect, we might should've thought through it a little more. :gar-Bi It turned out a little more difficult than we...