mortise

  1. T

    Jessum Mortise zip $56 + free shippin with code

    Use the code from the other post about Woodcraft and get this cheap, plus other closeouts, http://www.woodcraft.com/Search/search.aspx?Action=2&AnswerId=122283&SH=QT1DbG9zZW91dH5CPUNsb3Nlb3V0fkM9N35EPTI0fkU9MF4xXjBefkk9UHJpY2V_Sz00fkw9MX5NPTh_Tj0xNX4&SI=586baae3-1190-4bf7-afb3-243969d68ae5
  2. froglips

    Mortise bench on the quick/cheap....

    Thought I'd share the prototype of a class oriented mortise bench Ed, Mark and I came up with today. View image in gallery Its made from construction 2x4's 28" long top, and two legs at 30". A 12" piece across the bottom of the front leg did a lot to keep the bench from wobbling side to...
  3. S

    Non mortise hinge

    Any recommendations for non mortise hinges for frame less cabinets? I was thinking of these http://www.rockler.com/product.cfm?page=10052 but would hoping to spend about half that. Trying to get my doors to set as close together as I can. They are frameless full overlay cabinets.
  4. Y

    hollow mortise chisel

    I just got my new drill press. I was really wanting a dedicated mortise machine, but my old drill press died first so I had to replace it first. My question to you guys is, what do you think about the bolt on hollow mortise chisel. Should I wait to get the machine or go with bolt on. Thanks, Jody
  5. R

    Free Demo: Mortise & Tenon

    Sat., May 15 1pm-4pm Tim Williams, demonstrator Asheville Hardware, Woodworkers' Supply 10 Buxton Ave (at the southern edge of downtown Asheville) 828-252-8088 www.ashevillehardware.com
  6. NCPete

    JET Line Boring head for Mortise Machines

    What are your thoughts on this device? Looks like it could be an item worth considering, especially considering it's current bid price. don't think I could justify it at the original list, something over $500, but at less than $150 it seems worth a look.
  7. NCTurner

    Durham CL Grizzly Mortise Machine - $100

    email this posting to a friend raleigh craigslist > for sale / wanted > tools please flag with care: miscategorized prohibited spam/overpost best of craigslist Avoid scams and fraud by dealing locally! Beware any deal involving Western Union, Moneygram, wire transfer, cashier check...
  8. froglips

    DVD: Mortise & Tenon, Kinghott $11

    Got this in the email this morning. Popular Woodworkings book store has this DVD 45% off (regular $19) now $11 Plus, orders over $25 free shipping. This link should work. http://links.mkt230.com/ctt?kn=13&m=4214383&r=Njg3MzcyMjg3S0&b=3&j=MTMyNzg2NzE1S0&mt=1&rt=0 If not, try starting...
  9. N

    Mortise and tenon joints

    I'm working on making a bed headboard for my wife. Its basically a frame with slats running vertically that will be painted in the end. I'm so new at this, I was thinking that I'm going to dowel slats in place and possibly countersink a screw for reinforcement. I was talking to my father in...
  10. dino drosas

    Mortise Chisel Set - yard sale find ???

    I recently found this set of Bracht (made in Germany) chisels. They are metric sized; 6, 8, 10 and 12mm, a bit rusty and appear to have never been used. Question is: how should you sharpen them? If you lay the bevels on a wheel you get a pretty deep hollow grind since the bevels are so long...
  11. N

    Original Mortise Pal $99

    Not sure if anyone knew about this.(couldn't find it here) Found out about the sale through another forum and just ordered one. Limited Quantity. $99 +$8 for shipping. It's a good deal! http://www.mortisepal.com/sale.html
  12. Len

    Mortise Chisel Recommendations?

    Well I went to the Woodwright's School yesterday and did my very first hand cut dovetails and mortise & tenon joints. Now I'm hooked. It turns out I have the tools I need for doing dovetails, but I've never owned a mortise chisel. Before I run out and buy one or two, I'm looking for some...
  13. froglips

    Pre-Gloat Mortise Chisel has shipped..

    I just got notification from Joel at Tools for Working Wood. :3dblob3: Shipped in this package: 1 of MS-MORT.5/16 English Mortise Chisels by Ray Iles - 5/16" were shipped Now I will be camping out on my front stoop looking for the FedEx truck. Thanks to the POS (Power of Schwarz)...
  14. B

    Accent table-first attempt at mortise and tenon joints

    This table was made as a pine prototype I made before I make two more, one out of black walnut and one out of cedar (outdoor use as a plant stand), in order to try out my ability at mortise and tenon joinery. I cut them all on my router table and they turned out pretty clean I thought. The only...
  15. AAAndrew

    Frank Klausz cutting a mortise by hand video

    When I went to the Woodworking in America Conference last November I brought along my little still camera. I began to take some videos with the little thing just because some of the presentations were so amazing. The quality is not the best, but the content is pretty good. Last night I was...
  16. J

    Making a Through Mortise

    I'd like some suggestions on how to make a through mortise using a plunge router without "blowing out" the back side. I have a homemade mortising jig that is pretty accurate, but I've only used it to make 3/8" blind mortises. :dontknow: I'll probably not attempt to square up the mortise...
  17. gordonmt

    How to mortise the end of a board?

    I have a project that requires several mortises (the hole) to be made in on the grain end of several small 2 1/2 inch wide boards. I have a table top mortiser but it does not lend itself to this type of board end drilling. I am leaning toward a drill, a vise, and some sharp chisels but I was...
  18. K

    router table mortise Jig w/pics

    Well I spent today working on the mortise jig to go along with the tenon jig I built yesterday. I decided to build this jig for really quick setup. So it only does 1/4" in 3/4" stock and if I remove the face plate it will do 1/2" in 1 1/2" stock. Like the other jigs this uses a 1" bushing...
  19. S

    hand cut 18 inch x 10 inch x 40 foot mortise

    .
  20. Canuck

    Mortise Chisel & Bit

    It appears that my set of mortise chisel/bits have about had it for my Delta 651 hollow chisel mortiser.:roll: Can anyone tell me if the original Delta set is worth sharpening? I have seen mortise chisel sharpeners out there, but not sure if that is worth a try or should I just invest in a...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top