morris

  1. Morris Chair

    Morris Chair

    QSWO Bow Arm Morris Chair. Finished with aniline dye, oil glaze and 4 coats of 321. Total of 44 tenons: 4 through tenons, 12 floating tenons and 28 traditional mortise and tenon joints. Leather seats by Superior Finishing in Waynesville, NC
    • gfernandez
    • Media item
    • arm bow chair morris
    • Comments: 0
    • Category: 2013 Contest Winning Entries
  2. Arbor Bow Armed Morris Chair

    Arbor Bow Armed Morris Chair

    This is my signature Morris Chair in Cherry.
    • Brian Brace
    • Media item
    • arbor armed bow chair morris
    • Comments: 0
    • Category: Member Galleries
  3. T

    Possible deal on Morris chair arms

    Least thats what they look like to me, Its in Hickory, N.C and theres some unfinished as well. Don't know what their made of but if they stay at that price ,Its a steal, http://www.irsauctions.com/popups/bidders_paddle.asp?lot=194811&auction=ABNV807HSBLI7T6SINJE18JG22R1QU&id=14695 ...
  4. S

    Morris chair legs

    I cut out and glued up the QSWO legs for my Morris chair today. I'll never use this beautiful and expensive wood for this purpose again. I nearly cried as I glued the gorgeous flecks and rays to the INSIDE OF A CHAIR LEG! :gar-Cr Where it will NEVER be seen!:wsad: In the future I'll laminate...
    • smitty62
    • Thread
    • chair legs morris
    • Replies: 3
    • Forum: Wood
  5. bluewing92

    Morris Chair question

    LOML has a recliner that is on its last leg (read well worn) it is an upholstered high wing-back recliner. She does not want to repair it; she is looking for something different. Here is my question: Is a Morris Chair really as comfortable as I’ve heard? Can I get anyone who has made one to...
  6. thrt15nc

    Morris Chair Update

    I finally got the chair stained and we think it looks great. Here's some pics from today while in the "finish booth." :gar-La; So far, four coats of polycrylic sprayed on with HF's $39 spray gun with very light sanding (white pad) between the second and third coats. I've got the cushions, and...
  7. thrt15nc

    WIP - Morris design chair

    Here's a couple of pics of a chair I've been working on for ages.:embaresse Cushions are being made, next is more sanding, then staining, finish coat, etc. Then this one gets to live in the living room!! <Thank you dear!> Thanks for looking, Tom
  8. dancam

    Morris Chairs, Ottoman and A&C Table and Frame

    Well I finally got the cushions back from the upholsterer and the finish on the chairs and table. These chairs were a fun project and I was fortunate to get a real nice batch of QSWO from Mountain Sawyers in Fletcher, NC. The chairs were a mixture of plans from FWW and Woodsmith...I took the...
  9. dancam

    Morris Chair - WIP

    Well I finally got the construction phase completed and I'm now ready for the finishing. I'm going to farm out the leather upholstery to a professional. The chair is constructed of QSWO and the design is a combination of the FWW plan and the Woodsmith plan. I also built an Ottoman (again a...
  10. JimThomasson

    Red Oak Morris Chair

    I just finished making this red oak Morris chair for my niece for Christmas. Even made the cushions! Got my wife to teach me how to use her sewing machine and I took it from there. Got to learn a lot on this project! Merry Christmas everyone!
  11. JimThomasson

    2 questions: Morris Chair / qs red oak

    Approximately how many bf are needed to build a nice Morris Chair with matching ottoman? I would like to build one our of QS Red Oak? Any of you sawyers gonna have any soon at a good price?
  12. Nativespec

    Morris Chair

  13. JimThomasson

    Need plans for a nice Morris chair and ottoman

    I need to find plans for a nice Morris chair and ottoman to make for my niece. She likes Mission style, but does not want a whole lot of vertical slats .... some are ok, but not a lot. Any help will be greatly appreciated. Jim
  14. dino drosas

    Craftsman Style Morris Chair

    I discussed a reclining Morris chair project I had completed with a couple of members in the past and promised to send pictures. I have forgotten who the individuals were so I will post for all to see. The chair is constructed of solid hard maple. Legs are 2 1/4" square and the back splats are...
  15. dancam

    Morris Chair Plans

    I recently scored a hundred bdft of QSWO (a couple of slabs are curly QSWO) and wanted to build an Arts and Crafts Morris Chair. I'm looking for plans...does anyone have any suggestions where I could get a really good set of plans (would also like to have the ottoman with it). Thanks, Dan C.

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top