mantle

  1. MarkDarby

    Fireplace mantle project complete!

    Hi all, This took much longer than planned -- just like all my other projects. But, am quite happy with the way it turned out. This is black walnut with Watco Danish Oil, shellac, and four layers of varnish. It is 9'4" long and 1' deep. It has four storage areas and outlets installed in...
  2. M

    Yellow Pine, spalted poplar, cypress and white oak

    If anyone is interested I intend to begin milling down an old growth yellow pine log next weekend. The plan is to cut 12/4 live edge slabs and some 24/4 mantles a/o beams in widths up to 36" Next on the list will be some nicely spalted poplar, plan is to cut similar sizes in widths up to 14"...
    • mayszs
    • Thread
    • cypress mantle oak pine poplar slab walnut
    • Replies: 9
    • Forum: Wood
  3. Cherry Mantle

    Cherry Mantle

    • Bryan S
    • Media item
    • cherry mantle
    • Comments: 0
    • Category: Member Galleries
  4. New Mantle

    New Mantle

    This is a built from scratch mantle made of 3/4" finger jointed poplar using pocket hole joinery. Moulding on shelf is my design and run on my router table. All other moulding is either small or large base cap, and the fluted pilasters are done with custom run moulding from New Home...
    • Clifford
    • Media item
    • 3.23.13 cliff's fireplace mantle
    • Comments: 0
    • Category: Member Galleries
  5. R

    Walnut Mantle Advice

    I'm working on a fireplace surround and mantel and will be making the mantle out of walnut. Problem is, the mantle needs to be 9 - 1/2 or 10 inches deep, 72 inches long and 2 inches thick minimum. You'll be able to see the top and portions of the bottom. I have a stock of walnut in different...
  6. BM_Mantle_2

    BM_Mantle_2

    • Seamus Eamon
    • Media item
    • - blue mahoe mantle rustic
    • Comments: 0
    • Category: Member Galleries
  7. BM_Mantle

    BM_Mantle

    • Seamus Eamon
    • Media item
    • - blue mahoe mantle rustic
    • Comments: 0
    • Category: Member Galleries
  8. Crrunion

    Mantle Clock

    View image in gallery View image in gallery I'm new to the NCWW after a long layoff from woodworking but I wanted to post a couple of pictures of a Mantle Clock I built a few years ago as a kind of introduction to the website. The clock has a mechanical movement and the case is made from...
  9. Mantle

    Mantle

    Mantle
    • moodyfloyd
    • Media item
    • mantle
    • Comments: 0
    • Category: Member Galleries
  10. Mantle

    Mantle

    Mantle
    • moodyfloyd
    • Media item
    • mantle
    • Comments: 0
    • Category: Member Galleries
  11. Ken Massingale

    Hanging A Mantle

    I'm in the final stages of making a Cedar mantle for a buddy. He wanted it to be made from a Cedar tree from his property so he supplied a well dried 5 foot section of log (and around 10 other nice log sections for me) about 10 inches in dia. I used the Alaskan Chainsaw Mill to slab off a 4"...
  12. JackLeg

    Small Mantle Clock

    Here's a shot of the small clock I made recently. It's made from white oak scraps, and the works are from Klockit. Thanks to FredP for cutting the hole in the face trim plate. www.ncwoodworker.net/pp/data/500/medium/Mantle_Clock2.JPG Thanks for looking. :notworthy:
  13. augden

    Mantle Clock

    So this is pretty much showing off but I'm really excited. I just finished (well almost) a mantle clock for my fiance. It's a 2" chunk of Wenge salvaged from a mantle I installed a year ago. The legs are 1 1/2" maple. I'm finishing with shellac (first time ever using shellac if anyone has...
  14. rhett

    finished mantle

    Here is a mantle I recently finished. It is 10' x 6' solid cherry with a natural pre-cat finish. Thanks for the referal Bernard.
  15. adowden

    Request for custom mantle

    A gentleman in Chapel Hill contacted me earlier this week about wanting a custom fireplace mantle. I have too many current projects and an unfinished workshop. If anyone is interested, you can send me a PM.
  16. ChrisMathes

    New Mantle Clock - my biggest project yet :-)

    For my wife's birthday, I made this mantle clock off of plans from Klockit. As many of you have helped me with questions/ideas over the past few weeks, thank you! I am very happy with this, considering I have only built 1 music box and some picture frames so far. This was a good challenge for me...
  17. C

    Mantle Clock completed

    I just got my mantle clock back from the clock shop. I made this clock out of red oak. I had the clock master put in a 7 day Hermle triple chime movement. It is a gift for my sister, she graduated from nursing school earlier this year. It is a gift for graduation, birthday, Christmas, and a...
  18. C

    Rough picture of my mantle clock

    Very rough, no sanding but here is some pieces I have made. Should be able to start sanding and assembly this weekend. http://clowman.spryken.com/clock/index.htm

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top