Radial, tangential, and cross-sections of 350 North American woods from the 14-volume rare book The American Woods, published between 1888 and 1910 by the author, Romeyn Beck Hough. The images can be accessed by volume number or by the scientific or common name of each tree...
hasn't worked right the last few days; for me at least.
Clicking on a thread msg pointer from email doesn't take me to the target. Takes me to the last page, top msg.
Quite possibly the best thing you can do for all of your belt driven tools.
I bought a used no-name jointer from CL, and spent a great deal of time tuning it, trying to get a Yugo to run like a Cadillac. I guess maybe I made it from Yugo to Pinto, but hey you can only polish a terd so much...
Lots of us admire the Power Twist Link belt, which comes in any size you want, as long as it is a 1/2" wide belt. I have a Delta 10" tabletop drill press, and the pulleys measure a smidge under 3/8". The belt on the DP was the original (at least 10 yrs old), and was good for light duty only...
Lately when I have tried to use links that folks have put into their posts I have had difficulty (links will not open). At first I thought it was at my end since a lot of my problems are a result of a less than optimal operator/keyboard interface :gar-La; Today I saw that I was not alone with...
This thread started out innocent enough but I think Jeff's reply "link" is off color for a family forum. What are your thoughts.
http://www.ncwoodworker.net/forums/showthread.php?t=14489
Forgive me if I am jumping.
I just found these links, hope it is helpful to some.
http://members.core.com/~nieling/wood/tools.htm
http://www.ntwa.org/links.html
http://users.goldengate.net/~kbrady/woodlinks.html#3.1
http://members.tripod.com/~Luis_E/wood.html
David
I recently stumbled across this link - it's the Hull-Oakes sawmill up in the PNW. It's a steam driven sawmill that was built around the turn of the last century, and an interesting photo-essay.
Scott
http://www.garymkatz.com/OnTheRoad/HullOaks.htm
I need a link to use of mortise-and-tenon cutting with hollow chisel mortising attachment for my drill press. I have the attachment but I don't have instructions with it. My cut will be 1" wide and 8" long on a 1 3/8" board. I could use a Forstner bit and a sharp chisel but I have this...
I have ignored a proposed addition to our Link Library that was submitted by an unregistered user. It is a link to www.woodblank.com, a supplier of exotic woods for woodturners. It is an auction site and doesn't show any specific relevance to NC, only to those looking for turning supplies...
I made a change to how the "User Name" link functions in the list of members galleries. I did away with the "(show user's_name album)" link that we had under the User's Name and set it up so when you click on the user's name it will take you straight to the user's photo albums.
IMHO this...
The original plan ver "B.1.c said that we would scrap the old software links and downloads, which were seperate products and replace them with them one product called Links and Downloads Manager which could take care of both. The primary reason was that Vba_links, the product that did the links...
I put a link belt on my new jointer this afternoon and although it runs very smoothly (startup, shutdown), the noise level just about doubled. It has a high pitched whine when running. I loosened the belt some but the noise still remains. Is this normal or am I doing something wrong. I can...
The number of links to good woodworking related websites has increased over the last few weeks. I would like to take this opportunity to remind everyone of the link library. If you can't figure out where to put it there, leave it in the general category. We can move it around as organizational...
2 Link Library Admins
Responsible for all aspects of the library, moderating and approval or disapproval of all uploads. Organization and modifications updating to new software when appropriate.
Becomes champion of the Link Library, encouraging members to add links of interest the link...