light

  1. WoodWrangler

    $4 Magnetic Light at Lowes

    Stopped by Lowe's tonight and they had a magnetic light on clearance for $4 (normally $20). It seemed to be a corporate clearance tag and not a regular "manager's special" If you need one ... might be worth checking with your local Lowe's this weekend. The light was in the grinder section...
  2. A

    Tool light problem solved

    Awhile ago I hard-wired accessory lights to my 110V drillpress and bandsaw (see pics below). I connected the lights to wiring in the drill press pulley housing and the bandsaw switch box. Unfortunately, when I upgraded and rewired the motors for 220V, I could no longer use the 110V accessory...
  3. Cuprousworks

    Delta AP100 Air Cleaner with Work Light - Clearance Sanford

    I stopped by the Stanford store yesterday in seach of the Bies clearance (no deal, they're evidently sold since thursday) but I noticed they had the air cleaner with worklight on clearance, $69 (I think). Hint: someone on woodnet.net mentioned getting it for $50 complete with the display...
  4. DaveO

    I've seen the light....

    After returning from Woodcraft today with my new heavy duty bowl scrapper. I decided to turn a shallow Red Oak bowl, about 9" in dia. and 1¾" deep. I was finishing up the bottom with the scrapper, which worked beautifully, and the cutting just didn't sound right. I turned off the lathe and...
  5. T

    Dark and light maple glue up; how to blend

    I am at the point in the project where it is time to apply the finish. I plan to use this process suggested by local experts. Sand 120, 180, 220 Raise grain with distilled water Sand 220 Die to color with water base die with 1/2 to 1/4 cut lightly sand with 220 seal with clear shellack seal...
    • Travis
    • Thread
    • blend dark glue light maple
    • Replies: 7
    • Forum: Finishing
  6. Matt

    Hitachi DP is a Little Light for Me

    This isn't really woodworking, but more a "don't try this at home". I recently attempted to bore some 1 7/16" holes in 3/16" thick 304SS plate with my almost brand new (I think I had used it 2 or 3 times before) Hitachi B16RM 15" Drill Press. Well, I don't recommend anyone else do that. I...
  7. Terry

    Light Clamp for Vac Hose

    I saw a thread this week on a new Drill Press table and it showed a Vacu Hose on it and someone made the comment that it would be nice to be able to move around. Just a thought Terry:eusa_thin
  8. Light Clamp for Vac Hose on Drill Press

    Light Clamp for Vac Hose on Drill Press

    Drill Press Jig for Vac Hose
    • Terry
    • Media item
    • clamp for hose light vac
    • Comments: 0
    • Category: Member Galleries
  9. J

    The Gift of LIght

    This morning at 5:30 AM the power went off. Instantly my emergency light came on. Now think for a minute-You are in your shop when the power goes off. Gropping in the dark, you feel your hand touch the blade of your saw, and at that very instant, the power comes on. Not a pleasant thought is it...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top