leaf

  1. construction progress

    construction progress

    Leg billets for the drop leaf table have been jointed, squared and stickered to rest before final sizing. The leg pattern sits on top of one of the billets. They were dried within 1/4 inch of the billet size needed so I don\'t expect much change.
  2. construction progress

    construction progress

    Couple of sequential walnut boards for dropleaf table project 4/4 x13x 10\'6"
  3. T

    drop leaf table to expanding table

    been searching the web about a hour or so but thought I would make a thread here and see if anyone has any ideas I have a old walnut I think dining room table... it is a drop leaf on both sides that measures about 26" each each and then the regular table part is 27" deep so open you get a...
  4. LeftyTom

    WTB Leaf Shredder/Wood Chipper

    I am in the market for a leaf shredder/wood chipper. Had a hefty 8HP model that developed some valve trouble. This time around, I'd prefer something with OHV motor, belt drive or centrifugal clutch. I'd prefer something bigger than 5HP. When I shred leaves I run the shredder for 4 hours or...
  5. IMG_5806_1280x736_

    IMG_5806_1280x736_

    natural edge spalted big leaf maple
  6. IMG_5803_1280x854_

    IMG_5803_1280x854_

    natural edge spalted big leaf maple
  7. Maple Kitchen Table with Drawers with Leaf

    Maple Kitchen Table with Drawers with Leaf

    Maple Kitchen Table with drawers and 18" leaf
  8. Mark Stewart

    Leaf ID

    Its time for everyones favorite game show. What tree did this come from. I think it is either a weeping cherry or a willow but I could use an expert opinion. Thanks guys. mark
  9. leaf

    leaf

    leaf
  10. WoodWrangler

    Leaf ID

    Alright ... who can help me identify these young leaves? I plucked two from some young "trees" and one from what might be a vine, or horizontal tree :no: Any help is appreciated in ID'ing the plant they belong to is appreciated! 1. 2. 3.
  11. Joe Scharle

    Fly Leaf Table WIP

    Thought I'd post this now even though it may take a while to finish. I started with a dining table fly leaf that had some damaged trim. You can often find these at second hand/ recycle stores for a buck or two. They make very nice hall tables and if you find one that you can make to match your...
  12. Maple Leaf Box

    Maple Leaf Box

    Jewelry Box Scrollsaw pattern
  13. Kyle

    Candle stand-Claro graft walnut and big leaf maple burl

    Finally finished a candle stand so I can put my glasses down beside the bed instead of accrss the room at night. The wood is Claro graft (english and Claro Walnut(California) and the top is Big leaf maple burl (Oregon) I did an inlay (maple burl)around the joints of the feet and put "boots"...
  14. Tom Dunn

    Wide drop leaf table

    I am in the process of making rough sketches/plans for a drop-leaf table, material not selected yet. The center portion will be about 12" wide, the leaves 24-28". Weight is not a problem, saving space is foremost. Sturdy construction is important. Would it be better to make the leafs from 5/4...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top