issues

  1. SteveColes

    Avoid DQ and Corporate Member Issues

    Occasionally, we get reports of DQ of Corporate Member issues. While there have been bugs in the code, often the problems are improper settings of the required parameters. In investigating the most recent case, two important things came to light. The fields and settings for DQ and Corporate...
  2. CDPeters

    Site Issues?

    Maybe it's just me, but I seem to be getting alot of errors today: tcp_Error - internal server error Error 503 - Service Temporarily Unavailable Error 500
  3. Canuck

    Photo Upload Issues

    Just tried to upload a photo to one of my albums and received the following error message.... Upload Error 500 Tried several times and received same issue?:gar-Cr Thanks Wayne
    • Canuck
    • Thread
    • issues photo upload
    • Replies: 40
    • Forum: Help Desk
  4. b4man

    Quick Books Issues

    Greetings; Joe and I have been trying to resolve some program issues I'm having as a Mac user vs the PC version we currently own in QB's. In speaking with a business consultant @ Apple, an unsuccessful attempt to address my problem with Intuit ( due to a language barrier no doubt) and several...
  5. D

    Table saw alignment issues

    After a variety of issues, I was checking blade parallelism on my TS (Grizzly G0691 - cabinet saw) and found it was a bit off. I raised the blade to full height and re-aligned to the right miter slot using a dial indicator (~0.001" front to back). After lowering the blade to my cutting height, I...
  6. T

    DADO Blade issues

    All I have a Craftsman wobble DADO blade that cuts a slant to the bottom of the DADO. For the life of me I can not figure out whats wrong with it. I have another one which does not do this and they seem like they are set up the same. Any safe ideas on how to fix this. Thanks Terry
  7. TracyP

    Moderation Issues

    Staff, please, if you feel the need to forward a moderation issue to someone; forward it to me and not Doug. He is not part of the moderation process. I am the only Board member that has any thing to do with moderation. If I feel that a moderation issue needs BOD discussion, I will bring it...
  8. SubGuy

    Drill Press Issues!?!?

    Ok, so I bought some 3x3x12 Purpleheart turning stock to make some more of those "Cube in Cube's" (well Cube in Cube in Cube). I have a no name 1/5hp benchtop 3 speed drill press. I'm having a couple issues. I can't cut the end grain of the Purpleheart with a 2" forstner (brand new from...
  9. C

    Bowl Issues

    I have started to turn this bowl. I have only turned the bottom and sides and this is what it looks like View image in gallery What should I do? Do i Fill the crack with CA then work on finishing the bowl? Or do I finish the inside of the Bowl and then fill in the crack with CA? or...
  10. S

    Vibration issues

    I have never really worried about vibration until tonight. All of a sudden at about 8k rpm I have this really bad vibration that I have never experienced before. This is after truing up the piece. Now that I am more sensitive to vibration I can tell that there is still vibration below 8k but...
  11. davejones

    Ridgid Planer Issues

    I had my first major mishap in the shop last week while running my planer (Ridgid R4330). My knives were dull so I turned them to the other side. While doing this I found 3 bolt heads that were stripped on the knife backer bars. I eventually was able to get them out, and replaced them with...
  12. farmerbw

    Pic upload issues

    I give up. I've been trying since Friday to upload some pics and every time I try the upload page only has "Updating Software" on it. It seems other folks are able to upload pics since I see a lot of new posts have them. Is this still due to the updates and if so how is it working for...
  13. R

    Chinese Drywall Issues

    Some months ago someone posted a thread regarding poor quality drywall (voids and such). The following is currently on yahoo.com, and appears to relate to other issues with the products.:icon_scra:nah::no: http://news.yahoo.com/s/ap/20090411/ap_on_bi_ge/chinese_drywall
  14. T

    Advice on technique? Couple of issues

    Hi all, Jointer: Seems I must be doing something wrong here...I have an 8" jointer, never had any issues with it. Do not know if I just noticed it or I have always had the problem but, when I lay one of the wide faces down to flatten it, the end up front always ends up noticeably thinner. I do...
  15. Travis Porter

    Planer issues

    I am starting to have issues with my planer. It is a Powermatic 209HH - a 20" Chiwanese planer with a Byrd shelix head. I know of at least one member who has the same type of unit, but I think his head has straight knives not the carbide insert head. I will say up front that I changed the...
  16. R

    FREE - Back Issues of Fine Wood Working

    More house cleaning and have the following back issues of Fine Wood Working free for the "getting". 6, 7, 14-47 (all BW) 48-68 (Color) Index for issues 1-65 I live in Cary and work in downtown Durham. If you want some or all, we can either arrange for a time for you to come over and pick them...
  17. R

    FREE: Shop Notes Back Issues

    I am doing some house cleaning and have the following back issues of Shop Notes free for the "getting". Issues: 55-61, 63-72, 85-90 I live in Cary and work in downtown Durham. If you want some or all, we can either arrange for a time for you to come over and pick them up at the house or work...
  18. SteveColes

    Have had any issues getting your Discount at Klingspor

    If you have, please post here. I need the date that this happened. My purpose is not get you any refund, just to figure out what is happening. Thanks
  19. M

    Looking for a Few FWW magazine Issues

    As many of you know, I'm President of the Western NC Woodworkers Association. One of our members just contributed a collection of Fine Woodworking magazine (he got them from a contribution, too), but it is missing a few issues that we'd like to obtain to make a complete set. We are missing...
  20. dino drosas

    Fine Woodworking Issues - FREE

    I have some extra issues of Fine Woodworking magazine (issues #62-#67) that I will give to whoever wants them, POSTAGE NOT INCLUDED

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top